Shrink Wrap Panel

Location: 2D page

Use the Shrink Wrap panel to generate an enclosed volume or solid mesh, and is typically used to approximate and simplify an existing model. For details, see Shrink Wrap Meshing in the User's Guide.

engine_original_stl

engine_loose_5

Shrink wraps can be generated using two algorithms: Loose or Tight. These determine how closely the resulting mesh adheres to the details of the underlying model, and are best suited to different use cases which will vary for any given use.

•	A Loose Shrink Wrap generates a loose-fitting shrink wrap mesh that generally conforms to the model.

•	A Tight Shrink Wrap generates a tight-fitting mesh that adheres closely to the underlying model, capturing as many features as possible.

In both wrap types, the steps necessary to generate a shrink wrap are identical.

Subpanels and Inputs

There are no subpanels on the Shrink Wrap panel. All inputs and command buttons are located on the main panel.

Panel Inputs

Input

Action

(entity switch and selector)

Use the switch to choose the type of entity that you wish to wrap: nodes, elements, components, surfaces, points, or solids. Then use the entity selector to pick the entities that you wish to wrap.

features

Use this selector to pick feature lines on the model that must be retained. When meshed, elements will not cross over these lines.

shrinkwrap_features_comparison

tight wrap / loose wrap

This option is not available when wrapping nodes or points.

A tight wrap conforms more strictly to the underlying geometry, while a loose wrap abstracts that geometry to a greater degree.

Tight Wrap – 2mm

engine_tight_2

Loose Wrap - 2mm

engine_loose_2

Here you can see that a loose wrap results in less fine detail,
particularly around the pulleys and exhaust pipes.

patch holes

This option is not available when wrapping nodes or points.

If your model contains holes that you wish the shrink wrap to cover over as if they did not exist, click the patch holes checkbox. Three new inputs appear:

•	Enter a value for max gap size and max hole size.

Holes refer to more-or-less circular or oblong openings, while gaps refer to void spaces between components. In both cases, holes or gaps larger than the specified value (in model units) will not be patched over.

•	If you want to retain the elements used to patch the holes for verification purposes, click the create hole elements checkbox. The holes will be placed into their own collector called ^patched_holes, which displays in the Model browser.

element size =

The target element size for the shrink wrap mesh.

Note:

Actual element size will vary depending on the model's features in order to improve mesh quality.

generate solid mesh

When this option is active, the shrink wrap is created as a solid mesh rather than a shell mesh. This results in a mesh with no void space inside, rather than a hollow "bag" of mesh around the geometry.

mesh orientation: global system /
local system

Choose whether to orient the mesh according to the global coordinate system, or a local one. This can strongly affect how the mesh follows the underlying geometry as shown below:

Shrink Wrap Output Using Global System

shrinkwrap_globalsystem

Here the mesh pattern runs diagonally across the pipes in the foreground.

Shrink Wrap Output Using Local System

shrinkwrap_localsystem

Here the mesh pattern is well aligned with the pipes in the foreground.

Command Buttons

The following action buttons appear:

Button	Action
mesh	Create the new shrink wrap mesh according to the input values.
reject	Undo the most recent shrink wrap mesh creation.
features	Open the features panel, where you can define feature lines in the model that should be preserved during the meshing process.
return	Exit the panel.

Shrink Wrap Panel

Shrink Wrap Panel

Shrink Wrap Panel

Subpanels and Inputs

Panel Inputs

Input

Action

(entity switch and selector)

features

tight wrap / loose wrap

Tight Wrap – 2mm

Loose Wrap - 2mm

patch holes

element size =

generate solid mesh

mesh orientation: global system / local system

Shrink Wrap Output Using Global System

Shrink Wrap Output Using Local System

Command Buttons

Button

Action

mesh

reject

features

return

See Also:

mesh orientation: global system /
local system