The hgdaisy external reader reads PAM-CRASH 2G DSY files (result files generated by the solver) into HyperGraph. You can also run it from the command prompt to convert PAM-CRASH 2G DSY files into Altair binary files (.abf).
An ESI license is not required for this reader.
Usage
Running from the command prompt
|
hgdaisy dsyfile outfile
|
Running in HyperGraph
|
By default, this reader is registered. If it is not, register it before reading DSY files. It is located in HWDIR\externalreaders\bin\$PLAFORM\plot.
When the reader is registered, you can read DSY files directly into HyperGraph.
|
For NODES, the following results are supported:
For BEAMS and BARS, the following results are supported:
| • | FSSH-Transverse S Shear force |
| • | FTSH-Transverse T shear force |
For SHELLS, the following results are supported:
| • | MXX- Local bending moment about x-axis |
| • | MYY- Local bending moment about y-axis |
| • | MXY- Local twisting moment in xy plane |
| • | EPMA- Maximum plastic strain over thickness |
| • | EPMI- Minimum plastic strain over thickness |
| • | NXX- Local membrane stress resultant in x-direction |
| • | NYY- Local membrane stress resultant in y-direction |
| • | NXY- Local in-plane shear membrane stress resultant |
| • | THIC-Resultant shell thickness |
For SOLIDS, the following results are supported:
| • | SXX-Stress in X-direction |
| • | SYY-Stress in Y-direction |
| • | SZZ-Stress in Z-direction |
| • | SXY-Shear stress in XY-direction |
| • | SYZ-Shear stress in YZ-direction |
| • | SZX-Shear stress in ZX-direction |
| • | EPLE-Equivalent plastic strain |
For TOOLS, the following results are supported
| • | THIC- Resultant shell thickness |
| Note: | Stamp options are not currently supported. |
|
