The Intergraph reader generates the following metadata:
BRACKET SUPPORT
Type |
Entities |
Description |
string |
assems |
Created for each bracket system and associated to the bracket system assembly. Its value is "Name = <name_1> ID = <id_1>; Name = <name_2> ID = <id_2>; …; Name = <name_n> ID = <id_n>”, where <name_1>, <name_2>, … <name_n> are the support names and <id_1>, <id_2>, …<id_n> are the support ids. |
COMPARTMENT <name>
Type |
Entities |
Description |
string |
assems |
Created for each compartment which has a child of type “Faces” and is attached to the generic system assembly to which the compartment belongs to. The <name> field is the name of the compartment; the value is “Faces = <id_1> <id_2>… <id_n> Compartment father = <id>”, where <id_1>, <id_2>…<id_n> are the ids of the faces, and <id> is the id of the compartment father if it exists (there could be a hierarchy of compartments). Generated when @ImportCompartments = on. |
END NORMAL
Type |
Entities |
Description |
string |
comps |
Created for ER systems in any case, and also for stiffener/beam systems in global analysis. Its value is the normal direction of the stiffener at the landing curve end point. Generated when @CreateMetadataForStiffenerNormals = on. |
END POINT
Type |
Entities |
Description |
string |
comps |
Created for ER systems in any case, and also for stiffener/beam systems in global analysis. Its value is the landing curve end point. Generated when @CreateMetadataForStiffenerNormals = on. |
MOUNTING RULE
Type |
Entities |
Description |
string |
comps |
Created for ER systems in any case, and also for stiffener/beam systems in global analysis. Its value is the mounting rule value as found in the XML. Generated when @CreateMetadataForStiffenerNormals = on. |
<name>
Type |
Entities |
Description |
|
double string |
assems |
The attributes that are in the XML under “Details” are attached to the main ship assembly. The <name> field is the attribute name and the double/string is the value of the attribute. |
|
double string |
comps |
Physical Properties |
Physical properties assigned in the XML to plate systems and bracket child are created as metadata. The <name> field is the property name and the double/string is the property value. Generated when @ ImportPlateSystemMetadata = on. |
Molder Properties |
Molded properties assigned in the XML to plate systems and bracket child are created as metadata. The <name> field is the property name and the double/string is the property value. |
NamingCategory
Type |
Entities |
Description |
string |
assems comps |
Generated for root system assemblies, bracket system assemblies, stiffener/beam/ER components, and member part components. Its value is the the XML field NamingCategory -> LongDesc. |
OBJECT TYPE
Type |
Entities |
Description |
||||||||||
string |
assems comps |
Generated for root system assemblies, bracket system assemblies, and stiffener/beam/ER components. Its value can be:
|
PLANE NAME
Type |
Entities |
Description |
string |
surfaces |
Created for reference planes. Its value is the name of the reference plane as found in the XML. Generated when @ImportTopologicalProperties = on or @ ImportCompartments = on. |
REFERENCE PLANE <n>
Type |
Entities |
Description |
string |
assems |
Created for root systems, for each XML child of type TopologicalProperties -> Boundaries -> RefPlane (the number <n> is just the index of the child). Its value is the value of this field. Generated when @ImportTopologicalProperties = on. |
REFERENCE STRUCTURE <n>
Type |
Entities |
Description |
string |
assems |
Created for root systems, for each XML child of type TopologicalProperties -> Boundaries -> ReferenceStruct (the number <n> is the index of the child). Its value is the value of this field. Generated when @ImportTopologicalProperties = on. |
START NORMAL
Type |
Entities |
Description |
string |
comps |
Created for ER systems in any case, and also for stiffener/beam systems in global analysis. Its value is the normal direction of the stiffener at the landing curve start point. Generated when @CreateMetadataForStiffenerNormals = on. |
START POINT
Type |
Entities |
Description |
string |
comps |
Created for ER systems in any case, and also for stiffener/beam systems in global analysis. Its value is the landing curve start point. Generated when @CreateMetadataForStiffenerNormals = on. |
STIFFENER TYPE
Type |
Entities |
Description |
string |
comps |
Created for each stiffener/beam/ER system component. Its value is the XML field Molded -> Type. |
XSECTION DATA
Type |
Entities |
Description |
string |
comps |
Created for ER systems and member parts in any case, and also for stiffener/beam systems in global analysis. Its value contains the xsection geometrical data (different for each xsection type) in the form “<data name 1> = <data_value 1> <data name 2> = <data value 2>… <data name n> = <data value n>” |
See Also: