Name
|
Description
|
Result
|
Auto correction action
|
Manual correction action
|
Unused materials
|
Checks for any materials that are not referenced by a property.
|
Lists the failing materials.
|
Deletes unused materials.
|
Not supported.
|
Material E is not defined
|
Checks if E of MAT1 or MAT8 is less than or equal to zero.
|
Lists the failing materials.
|
Not supported.
|
Opens the Materials panel.
|
Material Rho is not defined
|
Checks if the Rho of MAT1, MAT2,MAT4 ,MAT5, MAT8, MAT9, MAT10,MATHE and MATHP is less than or equal to zero.
|
Lists the failing materials.
|
Not supported.
|
Opens the Materials panel.
|
Material Nu is zero
|
Checks if the Nu of MAT1 and MAT8 is equal to zero.
|
Lists the failing materials.
|
Not supported.
|
Opens the Materials panel.
|
Material is missing a card image
|
Checks for defined materials with no card image.
|
Lists the failing materials.
|
Not supported.
|
Opens the Materials panel.
|
Unused properties
|
Checks for properties that are not assigned to a component or element.
|
Lists the failing properties.
|
Deletes unused properties.
|
Not supported.
|
Property is missing a card image
|
Checks for defined properties with no card image.
|
Lists the failing properties.
|
Not supported.
|
Opens the Properties panel.
|
PSHELL thickness is not defined
|
Checks if the property PSHELL thickness is less than or equal to zero.
|
Lists the failing properties.
|
Not supported.
|
Opens the Properties panel.
|
PSHELL and PSHLN1 with different MID
|
Checks if the property PSHELL has a different material defined for PSHELL and PSHLN1.
|
Lists the failing properties.
|
Not supported.
|
Opens the Properties panel.
|
PCOMP thickness is not defined
|
Checks if the first thickness value of Property PCOMP array is less than or equal to zero. The first thickness value is mandatory.
|
Lists the failing properties.
|
Not supported.
|
Opens the Properties panel.
|
1D Prop beamsection mismatch
|
Checks if the 1D property and the beam section attached to it have the same area and area moments of inertia. A difference greater than 0.01 will fail the check.
|
Lists the failing properties.
|
Disassociates the beam section from the 1D property.
|
Not supported.
|
Empty components
|
Checks for components that do not contain elements.
|
Lists the failing components.
|
Deletes the empty components.
|
Not supported.
|
Empty assemblies
|
Checks if assemblies are empty.
|
Lists the empty assemblies.
|
Deletes empty assemblies.
|
Not supported.
|
Empty sets
|
Checks if sets are empty.
|
Lists empty sets.
|
Deletes empty sets.
|
Not supported.
|
Empty contact surfaces
|
Checks if contact surfaces are empty.
|
Lists empty contact surfaces.
|
Deletes empty contact surfaces.
|
Not supported.
|
Empty groups
|
Checks if groups are empty.
|
Lists empty groups.
|
Deletes empty groups.
|
Not supported.
|
Empty plys
|
Checks if plys are empty.
|
Lists empty plys.
|
Deletes empty plys.
|
Not supported.
|
Empty load collectors
|
Checks if load collectors are empty.
|
Lists empty load collectors.
|
Deletes empty load collectors.
|
Not supported.
|
Empty vector collectors
|
Checks if vector collectors are empty.
|
Lists empty vector collectors.
|
Deletes empty vector collectors.
|
Not supported.
|
Empty laminates
|
Checks if laminates are not having any ply.
|
Lists empty laminates.
|
Deletes empty laminates.
|
Not supported.
|
CONM1 with zero diagonal mass matrix values
|
Checks if the diagonal mass matrix values of CONM1 are less than or equal to zero.
|
Lists the failing CONM1.
|
Not supported.
|
Opens the Elements panel.
|
CONM2 with zero mass
|
Checks if the mass of CONM2 is less than or equal to zero.
|
Lists the failing CONM2.
|
Not supported.
|
Opens the Masses panel.
|
Orientation vector along axis vector
|
Checks if the orientation vector of bar elements CBEAM and CBAR is along axis vector.
|
Lists the failing bar elements.
|
Not supported.
|
Opens the Bars panel.
|
Element connectivity
|
Checks for shell elements connected by one or less nodes and solid elements connected by two or less nodes.
|
Lists the failing elements.
|
Deletes the failing elements.
|
Not supported.
|
Unused BeamSections
|
Checks if any beamsections defined in the model are unused.
|
Lists the failing beamsections.
|
Deletes the unused beamsecions.
|
Not supported.
|
Unused sets
|
Checks if any sets are not used.
|
Lists unused sets.
|
Deletes unused sets.
|
Not supported.
|
Unused curves
|
Checks if any curves are not used.
|
Lists unused curves.
|
Deletes unused curves.
|
Not supported.
|
Unused systems
|
Checks if any systems in the model are not used.
|
Lists unused systems.
|
Deletes unused systems.
|
Not supported.
|
Unused laminates
|
Checks if any laminates in the model are not used.
|
Lists unused laminates.
|
Deletes unused laminates.
|
Not supported.
|
Unused plys
|
Checks if any plys in the model are not used.
|
Lists unused plys.
|
Deletes unused plys.
|
Not supported.
|
Unused vectors
|
Checks if any vectors in the model are not used.
|
Lists unused vectors.
|
Deletes unused vectors.
|
Not supported.
|