Name
|
Description
|
Result
|
Auto correction action
|
Manual correction action
|
Unused materials
|
Checks for materials that are not referenced by a component.
|
Lists all unused materials.
|
Deletes unused materials.
|
Not Supported
|
Unused properties
|
Check for properties that are not used in the model.
|
Lists all unused properties.
|
Deletes unused properties.
|
Not Supported
|
Property is missing a card image
|
Checks for properties that do not have a card image.
|
List all properties that do not have card images.
|
Not Supported
|
Opens the Property Create panel.
|
Property missing mass value
|
Checks if mass properties that do not have element mass defined.
|
Lists all Mass properties that do not have mass assigned.
|
Not Supported
|
Opens the Property panel.
|
Damper property is missing Damping and Mass value
|
Checks if Damper properties are missing the Damping or Mass value.
|
Lists all Damper properties that do not have damping/mass assigned.
|
Not supported
|
Opens the Property panel.
|
Beam Property missing HyperBeam Section
|
Checks if Beam properties are missing HyperBeam sections.
|
Lists all Beam properties that do not have beam section properties assigned.
|
Not supported
|
Opens the Property panel.
|
Empty Components
|
Checks if components have one or more elements.
|
Lists all components that do not have elements.
|
Deletes empty components.
|
Not supported
|
Unsed Sets
|
Check if sets are not used in the model.
|
Lists all unused sets.
|
Deletes empty sets.
|
Not Supported
|
Empty sets
|
Check if sets are empty.
|
List empty sets.
|
Deletes empty sets.
|
Not Supported
|
Empty groups
|
Checks if groups have either a master entity or slave entity that are assigned a contact surface/set.
|
Lists all groups with missing master and slave entities.
|
Deletes empty groups.
|
Not Supported
|
Empty contactsurfs
|
Checks if contactsurfs are assigned any elements.
|
Lists all empty contactsurfs.
|
Deletes empty contactsurfs.
|
Not Supported
|
Unused Sections
|
Check if there are any unused Beamsections defined in the model.
|
List all unused Beamsection collectors in the model.
|
Deletes unused beamsections.
|
Not Supported
|
Empty loadcollectors
|
Checks if there are any loads in the load collectors.
|
Lists all loadcollectors that do not have loads.
|
Deletes empty loadcollectors.
|
Not Supported
|
Empty Vectorcollectors
|
Checks if there are any empty vector collectors.
|
Lists all empty vectors.
|
Deletes empty vectors.
|
Not Supported
|
Empty assemblies
|
Checks if there are any empty assemblies.
|
Lists all empty assemblies.
|
Deletes empty assemblies.
|
Not Supported
|