|
»Click here to display Table of Contents«
|
OptiStruct Tutorials |
|
|
|
|
|
OptiStruct Tutorials |
|
|
|
|
|
»Click here to display Table of Contents«
|
OptiStruct Tutorials |
|
|
|
|
|
OptiStruct Tutorials |
|
|
|
|
The following OptiStruct tutorials are available:
OS-1000: Linear Static Analysis of a Plate with a Hole
OS-1010: Thermal Stress Analysis of a Coffee Pot Lid
OS-1020: Normal Modes Analysis of a Splash Shield
OS-1030: 3-D Inertia Relief Analysis using OptiStruct
OS-1040: 3-D Buckling Analysis using OptiStruct
OS-1050: Connection of Dissimilar Meshes using CWELD Elements
OS-1060: Analysis of a Composite Aircraft Structure using PCOMPG
OS-1070: Analysis of an Axi-symmetric Structure using OptiStruct
OS-1080: Coupled Linear Heat Transfer/Structure Analysis
OS-1085: Linear Steady State Heat Convection Analysis
OS-1090: Linear Transient Heat Transfer Analysis of an Extended Surface Heat Transfer Fin
OS-1100: Thermal Stress Analysis of a Printed Circuit Board with Anisotropic Material Properties
OS-1110: Setting up a Modal Analysis
OS-1300: Direct Frequency Response Analysis of a Flat Plate
OS-1305: Modal Frequency Response Analysis of a Flat Plate
OS-1310: Direct Transient Dynamic Analysis of a Bracket
OS-1315: Modal Transient Dynamic Analysis of a Bracket
OS-1320: Nonlinear Gap Analysis of an Airplane Wing Rib
OS-1325: Random Response Analysis of a Flat Plate
OS-1330: Acoustics Analysis of a Half Car Model
OS-1340: Fatigue (Stress - Life) Method
OS-1350: Fatigue (Strain - Life) Method
OS-1360: NLSTAT Analysis of Gasket Materials in Contact
OS-1365: NLSTAT Analysis of Solid Blocks in Contact
OS-1370: Complex Eigenvalue Analysis of a Reduced Brake System
OS-1371: Brake Squeal Analysis of Brake Assembly
OS-1372: Rotor Dynamics of a Hollow Cylindrical Rotor
OS-1375: Response Spectrum Analysis of a Structure
OS-1380: Computation of Equivalent Radiated Power
OS-1385: Heat Transfer Analysis on Piston Rings with GAP Elements
OS-1392: Node-to-Surface versus Surface-to-Surface Contact
OS-1393: Basics of Contact Properties and Debugging
OS-1500: Nonlinear Implicit Analysis of Bending of a Plate
OS-1510: Follower Loads, Nonlinear Adaptive Criteria, and Nonlinear Intermediate Results
OS-1520: Finite Sliding of Rack and Pinion Gear Model
OS-1600: Fluid-Structure Interaction Analysis of Piezoelectric Harvester Assembly
OS-1610: Thermal Fluid-Structure Interaction Analysis on a Manifold
OS-1900: Dynamic Analysis of a Three-body Model using OptiStruct
OS-1910: Dynamic Analysis of a Slider Crank with a Flexible Connecting Rod
OS-1920: Large Displacement Analysis of a Cantilever Beam using OptiStruct
OS-1930: Generating a Flexible Body for use in Altair MotionSolve
OS-1950: Curve to Curve Constraint
OS-2000: Design Concept for a Structural C-clip
OS-2005: Design Concept for a Structural C-clip with Minimum Member Size Control
OS-2010: Design Concept for an Automotive Control Arm
OS-2020: Increasing Natural Frequencies of an Automotive Splash Shield with Ribs
OS-2030: Control Arm Topology Optimization with Draw Direction Constraints
OS-2040: Spot Weld Reduction using CWELD and 1-D Topology Optimization
OS-2050: Pattern Repetition using Topology Optimization
OS-2060: Symmetry and Draw Direction Applied Simultaneously in Topology Optimization
OS-2070: Topology Optimization of a Reduced Model using DMIG
OS-2080: Topology Optimization of a Hook with Stress Constraints
OS-2090: Topology Optimization with Extrusion Constraints
OS-2095: Frequency Response Optimization of a Rectangular Plate
OS-2098: Topology Optimization of an Excavator Arm Model
OS-3000: Topography Optimization of a Plate Under Torsion
OS-3010: Topography Optimization of an L-bracket
OS-3020: Automatic Recognition of Bead Results from Topography Optimization of an L-bracket
OS-3030: Random Response Optimization
OS-3100: Combined Topology and Topography Optimization of a Slider Suspension
OS-3200: Optimization-driven Design of a Composite Aircraft Underbelly Fairing
OS-3300: Using the Lattice Optimization Process in OptiStruct
OS-3400: Optimization-driven Design of an Open Hole Tension (OHT) Specimen
OS-4000: 3-D Size Optimization of a Rail Joint
OS-4010: Size Optimization of a Welded Bracket
OS-4020: Composite Bike Frame Optimization
OS-4030: Discrete Size Optimization of a Welded Bracket
OS-4040: Size Optimization of a Shredder
OS-4050: Optimization of a Horizontal Tail Plane
OS-4070: Free-sizing Nonlinear Gap Optimization on an Airplane Wing Rib
OS-4080: Minimization of the Maximum Stress of a Rotating Bar: A Size Optimization
OS-4090: Manufacturing Constraints in a Free-size Optimization of a Composite Structure
OS-4095: Size Optimization using External Responses (DRESP3) through HyperMath
OS-4100: Size Optimization of a Bracket (using DRESP1, DRESP2 and DRESP3)
OS-5000: 2-D Shape Optimization of a Cantilever Beam
OS-5010: Cantilever L-beam Shape Optimization
OS-5020: Shape Optimization of a 3-D Bracket Model using the Free-shape Method
OS-5030: Buckling Optimization of a Structural Rail
OS-5040: Shape Optimization of a Rail Joint
OS-5050: Shape Optimization of a 4 Bar Linkage
OS-5070: Fatigue Optimization of a Torque Control Arm
OS-5080: Global Search Optimization
OS-5090: Thermal Optimization on Aluminum Fins