HyperMesh and BatchMesher

Visualization of Loads on Geometry and Loads on Mesh

Visualization of Loads on Geometry and Loads on Mesh

 Previous topic Next topic No expanding text in this topic  

Visualization of Loads on Geometry and Loads on Mesh

 Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

The Display panel allows you to visualize loads on mesh and loads on geometry either individually or together by setting the collector type to loadcols and using the toggle between elems and geoms.  The elems option controls the display of loads on mesh while geom controls the display of loads on geometry.  A simultaneous display is similar to the display of both elements and geometry belonging to a specific component.

Note:A major graphical display difference between loads on geometry and loads on mesh is the density of the arrows.  Multiple arrows represent loads on mesh (one arrow per node or element); a single arrow for each geometrical entity represents loads on geometry.  The basic length of the arrow also differs.  For the same arrow magnitude percentage setting or uniform size setting within the load application panels, an arrow that represents a load on geometry is longer than arrows representing loads on mesh.

 

 

See Also:

Introduction to Loads on Geometry

Terminology and Definitions

Application of Loads to Geometry

Exporting Loads

Working with Loads on Geometry - HM-4040