HyperWorks Release Notes

PAM CRASH 2G Interface 14.0 Release Notes

PAM CRASH 2G Interface 14.0 Release Notes

 Previous topic Next topic Expand/collapse all hidden text  

PAM CRASH 2G Interface 14.0 Release Notes

 Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

Highlights

hmtoggle_arrow1PYVAR

The PYVAR is supported for Pamcrash2G2010 version and onwards user profile.

•HyperMesh supports only PYVAR, since VARDEF is obsolete and fully replaced by PYVAR after Pamcrash2G2014.
•VARDEF is not exposed to the user in HyperMesh for creation (refer to the Pamcrash2G2013 Manual), but the VARDEF card is supported and it is converted to PYVAR in all user profiles upon import.
•Parameterization (PYVAR) is supported for control cards, control volumes, sensors, contacts/groups, curves, materials, properties and parts.
•The variables parameterized will be grayed out in the Card Editor so that it cannot be changed.
•Unsupported parameterized entities are replaced with corresponding values during import to avoid the loss of data with import warning message.
•Parameterization of entity IDs, legal values, elements, loads/load collectors, system collectors (transformation), vector collectors, output blocks and node coordinates are not supported.

 
hmtoggle_arrow1Support of New Version Pamcrash2G2013

Supported the new version of user profile Pamcrash2G2013. Supported and updated the keywords as per new version 2013.

 
hmtoggle_arrow1Support of New Version of Pamcrash2G2014

Supported the new version of user profile Pamcrash2G2014. Supported and updated the keywords as per new version 2014.

 
hmtoggle_arrow1Newly Supported Keywords
•SECFO_CONT_MS
•SECFO_LINK
•MATERIAL TYPES 80-83 – User-Defined Materials for Solid Elements
•MATERIAL TYPES 180-184 – User-Defined Materials for Shell Elements
•MCTRL under control card with Pamcrash2G2011 and onwards user profile
•MATERIAL 371 Pamcrash2G2013 and onwards user profile

 
hmtoggle_arrow1Updated Keywords
•ECTRL: Updated the options & defaults in sub keywords THICKNESS_INTEGRATION, BEAM_FORMULATION, ANTIDRILL as per the individual manual versions.
•Supported the sub keyword PLINK_DIST_CHECK & updated ENERGY_MONITORING.
•ACFLD: Supported new field IFRA
•CNTAC: supported the fields XDMPT, TLSTIF and IPRESS
•SENSOR: Added the two new fields TARGET and TIMEfil to sensor ITYP=6
•MTOCO: Added a new option IDNOD or NCOG to MTOCO ITMTO=1[Inertia]
•TIED: Added the new field IPCHK with allowed values
•PROFILE_DMP: Updated field PROFIL with allowed values
•OCTRL: Supported the following new sub keywords.
•OUTPUT_FILE_FORMAT, TIME_HISTORY, CONTOUR_PLOT, SOLTHP, BEATHP, RANTHP, MCOOR_AFM, MCOOR_ASM, STRESS_TENSOR, MPF_AFM and MPF_ASM.
•Updated the following sub keywords. PREFILTER, GLBTHP, SHLTHP, SHLPLOT, SOLPLOT, NODPLOT, BEAPLOT, COLOUTPUT, CNTPLOT and FPMPLOT.

 
hmtoggle_arrow1Resolved Issues
•Removed the keywords "MATER 21,102,130,132,203" which are phased out as per manual in Pamcrash2G2014.
•Import warning messages for the keywords "NODCO, VARDEF, LNKPLOT & NINT in SHELL card" as per the manual in Pamcrash2G2014.
•Import warning messages for the keywords " MATER 21, 102 & 203" as per the manual in Pamcrash2G2013.
•Avoided Application error while importing solver decks by supporting PYVAR, SECFO_LINK & SECFO_CONT_MS.
•Pamcrash2G 2002-2009 templates are available in the installation and can be loaded; however they are no longer maintained.