|
»Click here to display Table of Contents«
|
densres (Not Recommended for use in 10.0 or Later Versions) |
|
|
|
|
|
densres (Not Recommended for use in 10.0 or Later Versions) |
|
|
|
|
I/O Options Entry
DENSRES - Output Control
Description
The DENSRES command can be used in the I/O Options section to control the frequency of output of design results (density, shape, or thickness).
Format
DENSRES = frequency
Argument |
Options |
Description |
|
frequency |
<FIRST, LAST, Default = ALL |
FIRST: |
Optimization results are output for the first iteration only. |
LAST: |
Optimization results are output for the final iteration only. |
||
FL: |
Optimization results are output for the first and last iterations only. |
||
ALL, blank: |
Optimization results are output for all iterations. |
||
N: |
Optimization results are output for the first and last iterations and every Nth iteration. If N = 5, output occurs for iterations 0, 5, 10, 15, 20, and so on, and the final iteration. |
||
Comments
| 1. | This output control is ignored if OUTPUT, DESIGN is present. |
| 2. | When the DENSRES command is not present, results are output for all iterations. |
| 3. | From 10.0 onwards, it is recommended to use the OUTPUT I/O Option entry to control this output. |
See Also:
