HyperWorks Solvers

MBFORCE

MBFORCE

 Previous topic Next topic No expanding text in this topic  

MBFORCE

 Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

I/O Options Entry

MBFORCE – Output Control

Description

The MBFORCE command can be used in the I/O Options section to request force output for a set of joints and/or force elements from multi-body dynamics subcases.

Format

MBFORCE = option

Argument

Options

Description

option

<YES, ALL, NO, NONE, SID>

Default = ALL

YES, ALL, blank: Force is output for all joints and force elements.

NO, NONE: Forces are not output.

SID: If a set ID is given, forces are output only for joints and force elements listed in that set.

Note:Joints and force elements may share IDs. When MBFORCE is requested for a SET, force results are output for all entities whose ID is part of the SET definition.

Comments

1.When MBFORCE is not present, force results for joints and force elements are not output.
2.The force results for selected joints and force elements are output to the .mrf file.

See Also:

I/O Options Section

I/O Options by Function

The Input File