SENSITIVITY

I/O Options Entry

SENSITIVITY - Output Request

Description

The SENSITIVITY command can be used in the I/O Options section to request the output of the responses and sensitivities for size and shape design variables to a Microsoft Excel spreadsheet.

Format

SENSITIVITY = option

Argument	Options	Description
option	<YES, NO, ALL, NONE, STRESS, NOSTRESS> Default = NONE	NO, NONE:	The results and sensitivities are not output.
		YES, NOSTRESS, blank:	The results and sensitivities are output excepting stress, strain, and force responses.
		ALL or STRESS:	The results and sensitivities are output including stress, strain, and force responses.

Comments

1.	This command is ignored when OUTPUT, MSSENS command is present.

2.	The frequency of this output is controlled by the SENSOUT option.

3.	For more details on the output format, go to the #.slk file page in the output section of the Reference Guide.

4.	Additional sensitivity output requests for topology, free-sizing and gauge design variables can be made through OUTPUT,H3DTOPOL and OUTPUT,H3DGAUGE (in H3D format), and OUTPUT,ASCSENS (ASCII format).