File type

From the File type drop-down menu, select Inspire.

Version

Select the HyperWorks version number from the list.

Input file

Click the file open icon, , to select the input file.

Output directory

Click the file open icon, , to select your output directory to store your results file.

Out file comparison

Check Run

Click Check Run to output your solution.

Status

Under Result file, click Status to view the status of the Inspire model check run.

Html Report

Generates an HTML report of your session information for any number of files run through the process.

Solver Type

From the Solver drop-down menu, select the results type to be compared.  Option: Inspire.

Tolerance

The value used to set the tolerance for the difference in values between the reference and current version result files during comparison.

Default -  1e-6 for Scalar, Tensor, and Vector, if not individually chosen.

Scalar – Enter values if different for the scalar result type.

Vector – Enter values if different for the vector result type.

Tensor – Enter values if different for the tensor result type.

User Defined - Set the individual tolerance value for all data types.

Click Apply to set new values (enter the values in the text box).

Result

From the Result drop-down menu, select the result type.  Options included H3D and OP2.

Dynamically loads the selected result file type under Load Result on Run Solver.

PPT/HTML Report

Use one of these options to generate a PowerPoint or HTML report of the result value comparison.

For Pass - This returns a detailed report containing one slide per data type across load cases.

For Fail - In case of a failure, one slide per load case for each datatype is published so that it is easy to identify the load case that contains a difference in values.

Current/Reference

The Current and Reference sections contain the following options:

Version - Select the solver version from the drop-down menu.

Run Solver - This is required if the result files are not available, and the solver needs to be run to generate result files (for only one or both versions).

The Inspire(OptiStruct) solvers invoked in batch mode and the model selected through Load Model are run, and the result file path is populated in the Load Result field.

Load Model - Select the HyperView/Inspire model file.

Load Result - Select the HyperView results file (if Run solver is not selected).

Output directory

Click the file open icon to select your output directory to store your results.

Subcase

Simulation

Result Type

Select any combination of Subcase, Simulation and Result type from the populated areas.

Click All to select all items listed.

Apply

Click Apply to generate data to compare the results with combinations of the following: Subcase, Simulation and Datatype.

Compare result

The Compare result section displays the current file and the corresponding Reference file.  Click Report to display the diff report detailing the differences between files.

Message log file

A dynamically created message log file that displays the current status of processes in progress.  Click the Status/Diff button to display the respective report.  The message log file is a text file and is saved to your output directory.

Html Report

Generates an HTML report of your session information for any number of files run through the process.