apply result panel

Location: Post page

Use the Apply Result panel to apply the results analysis data to selected entities of your model. You can also create loads from the analysis data.

This function requires that you load an analysis results file containing analysis data.

By default, created loads are displayed using a representation of 100% of their magnitude. You can change this percentage by entering a different value in the magnitude% = field, or use the uniform size = option to display all loads as the same size.

HM_Panels_bmp00007

Subpanels and Inputs

The Apply Result panel contains the following subpanels and command buttons:

Panel Inputs

Input	Action
simulation =	Clicking this button displays a list of available simulations. Select the simulation that you want to use.
data type =	Clicking this button displays a list of available data types. Select the data type that you want to use.
total disp	By default, the total displacement (total disp) value of the node is used to offset the model..
entity selector	Use this to select the nodes, elems or comps to which the results data should be applied.
mult =	To multiply the values in the results file by a scale factor other than 1.0, enter a new scale factor.

Panel Inputs

Input	Action
simulation =	Clicking this button displays a list of available simulations. Select the simulation that you want to use.
data type =	Clicking this button displays a list of available data types. Select the data type that you want to use.
forces	The load types offered for selection depend on the data type in the results file. If you have vector results, you can create flux or temperature loads. If you have scalar results, you can create forces, accelerations, moments, or velocities.
magnitude %	By default, created loads are displayed using a representation of 100% of their magnitude. You can change this percentage by entering a different value here.
uniform size	Display all loads as the same size.
mult =	To multiply the values in the results file by a scale factor other than 1.0, enter a new scale factor.
label loads	Display the value of the loads.

The following action buttons appear throughout the subpanels:

Input	Action
apply	Apply the changes to the model.
reject	Reject any changes made.
return	Exit the panel.

Commands:

*applyresults()

*applyresultsasloads()

Apply Result Panel

Apply Result Panel

Apply Result Panel

Subpanels and Inputs

Panel Inputs

Input

Action

simulation =

data type =

total disp

entity selector

mult =

Panel Inputs

Input

Action

simulation =

data type =

forces

magnitude %

uniform size

mult =

label loads

Input

Action

apply

reject

return

Commands:

See Also: