Load Step: SRADIATE: Define Tab

In the Define tab, define *SRADIATE card on Abaqus surfaces (*SURFACE).

Note:

There is no graphical display in HyperMesh for loads created on Abaqus SURFACEs. Therefore, when you review a load collector in the Step Manager, only loads created on individual entities are highlighted. For loads defined on SURFACE, the underlying SURFACE elements are highlighted.

step_mgr_sradiate_define_tab

This dialog contains a Surface menu containing a list of the existing Abaqus surfaces. It also has a table for data line input. The table contains the following columns:

Column	Description
Surface	The name of the surfaces. Surfaces are added and deleted in this column using or , respectively.
Label	The *SRADIATE labels.
Ref temp	Ambient reference temperature.
Emissivity	Surface emissivity.

The SRADIATE option has the following buttons:

Button	Action
Review/Reset Surface	Reviews the selected surface by highlighting them in the HyperMesh graphics. Right-click on the Review button to clear the review selections.
Create/Edit Surface..	Opens a message with information about surface definition in HyperMesh
	Adds the selected surface from the drop-down menu to the data line table on the right.
	Deletes the selected surface from the data line table.
Review/Reset	Reviews the selected surface in the data line table. Right-click on the Review button to clear the highlighted selections.
Update	Updates the HyperMesh database with the data lines defined in the table. By default, HyperMesh does not create a display for loads defined with sets.

For tips on entering information and navigating in the Define tab, see Step Manager Tab Environment.