HyperMesh and BatchMesher

M1 Menu

M1 Menu

Previous topic Next topic No expanding text in this topic  

M1 Menu

Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

The M1 menu contains options that set the correct element or load type and enter the appropriate HyperMesh panel.  The following macros are included.

PART/:

3D/2D/1D/LINK

Enters the Components panel, selects the comps collector, and sets the correct card image.

MATER/:

3D/2D/1D/LINK

Enters the Components panel, selects the mats collector, and sets the correct card image.

PLY_DATA

Enters the Components panel, selects the mats collector, and sets the correct dictionary.

Mass elements:

MASS

Sets the element type mass = to MASS and enters the Mass panel.

NSMAS

Enters the Interfaces panel and sets the card image to nsmas.

Constraints:

RBODY

Sets the element type rigid = to RBODY and enters the Rigids panel.

NODCO

Sets the element type rigid = to NODCO and enters the Rigids panel.

RWALL

Enters the Rigid Walls panel and set the card image = to RWALL.

CNTAC

Enters the Interfaces panel and sets the card image = to CNTAC.

TIED

Enters the Interfaces panel and sets the card image = to TIED.

Elements:

BAR

Sets the element type 1dele = to BAR and enters the 1d Elems panel.

BEAM

Sets the element type beam = to BEAM and enters the Beams panel.

KJOINT

Sets the element type 1dele = to KJOIN and enters the 1d Elems panel.

JOINT

Sets the element type 1dele = to JOINT and enters the 1d Elems panel.

SPRING

Sets the element type spring = to SPRING and enters the Springs panel.

SHELL

Sets the element type tria3 = and quad4 = to SHELL.

MEMBR

Sets the element type tria3 = and quad4 = to SHELL.

TRIA_C

Sets the element type tria3 = TRIA_C.

SOLID

Sets the element type tetra4, pyramid5, penta6, and hex8 = to SOLID.

BSHEL

Sets the element type hex8 = to BSHEL.

Link elements:

PLINK

Sets the element type mass = to PLINK and enters the Mass panel.

ELINK

Sets the element type 1dele = to ELINK and enters the 1d Elems panel.

LLINK

Sets the element type 1dele = to LLINK and enters the 1d Elems panel.

SLINK

Sets the element type tria3 = and quad4 = to SLINK.

 

 

See Also:

Conn

Card

Find

M2

Sum

Tool