HyperMesh and BatchMesher

Pretension Bolt

Pretension Bolt

 Previous topic Next topic Expand/collapse all hidden text  

Pretension Bolt

 Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

Locations:        Tools menu > Pretension Bolt

 

Use the ANSYS Pretension Bolt utility to create pretension loads in 1D and 3D bolts of ANSYS models using the ANSYS PRETS179 element type. Element PRETS179 is a bar element with a third node used for pre-loading. Using this utility, you can get a pre-loaded bolt with PRETS179 elements created at the desired location with a third node. A pretension section is created and associated with the pretension elements created. Also, the pretension load card SLOAD is created with the defined load in the utility, as well as a load steps on and off values. You can edit this load card after completing this process.

pretension_utility_bolt

hmtoggle_plus1greyCreating a 3D Pretension Bolt
1.From the menu bar, click Preferences > User Profiles.
2.In the User Profiles dialog, select ANSYS.
3.From the menu bar, click Tools > Pretension Bolt.
4.In the Pretension Bolt dialog, set the Pretension Type to 3D.
5.In the Node ID field, enter the node ID for the third node of the pretension element.
Note:If you do not enter a node ID, a default node number will be assigned.
6.In the Section Name field, enter a name for the pretension section to be created.
Note:If you do not enter a section name, a default name will be assigned.
7.Toggle the type of method for loading the bolt to either Force or Displacement, then enter a corresponding value.
8.In the Loadstep ID to activate [LSLOAD] field, enter the load step ID to which the load is to be applied.
9.In the Loadstep ID to lock [LSLOCK] field, enter the load step ID to which the displacements or force loads needs to be locked.
10.Click Create.
11.In the panel area, use the Comps selector to select the bolt component.
Note:Multiple components are not allowed to be selected. If more than one bolt is selected, they will all be placed under one component.
12.Click proceed.
13.Use the elems selector to select the elements which form the cut section of the bolt. Pretension elements are created at this section.

A typical section is illustrated in the image below.

pretension_bolt1

14.Click proceed.
15.Use the node selector to select two or three nodes that define the load direction for the pretension load.
16.Click proceed. PRETS179 elements are created at the cut section with the pretension section created and associated to these elements. A SLOAD card with the given pretension load is also created.
17.To edit the SLOAD card, click Edit SLOAD.

 
hmtoggle_plus1greyCreating a 1D Pretension Bolt
1.From the menu bar, click Preferences > User Profiles.
2.In the User Profiles dialog, select ANSYS.
3.From the menu bar, click Tools > Pretension Bolt.
4.In the Pretension Bolt dialog, set the Pretension Type to 1D.
5.In the Node ID field, enter the node ID for the third node of the pretension element.
Note:If you do not enter a node ID, a default node number will be assigned.
6.In the Section Name field, enter a name for the pretension section to be created.
Note:If you do not enter a section name, a default name will be assigned.
7.Toggle the type of method for loading the bolt to either Force or Displacement then enter a corresponding value.
8.In the Loadstep ID to activate [LSLOAD] field, enter the load step ID to which the load is to be applied.
9.In the Loadstep ID to lock [LSLOCK] field, enter the load step ID to which the displacements or force loads needs to be locked.
10.Click Create.
11.In the panel area, use the Nodes selector to select the nodes of the 1D elements where the pretension element needs to be created.
12.Click proceed. PRETS179 elements are created at the node locations, with the pretension section created and associated to these elements. A SLOAD card with the given pretension load is also created.
13.To edit the SLOAD card, click Edit SLOAD.