/ANIM/BRICK/TENS/STRAIN

/ANIM/BRICK/TENS/STRAIN - Animation of strain tensor for a specified integration point of a solid, in global coordinate system

Generates animation files containing strain tensor for a specified integration point of a solid, in global coordinate system.

/ANIM/BRICK/TENS/STRAIN/ijk

Data

Description

ijk

Integration Point Number:

i : integration point number in direction r

j : integration point number in direction s

k : integration point number in direction t

1.	If the integration point ijk does not exist in a solid, strain tensor is set to 0. (for example: for a one integration point 8 nodes solid, strain tensor for integration point 112 is set to 0. Only strain tensor for integration point 111 can have non-null components).

2.	If j is greater than or equal to 10 (in case of /PROP/TYPE22), syntax becomes:

/ANIM/BRICK/TENS/STRAIN/i0k/j

With 10 < j < 200

3.	Strain tensor is output only if Istrain =1 in /PROP/SOLID, except for material laws 14, 24 and material laws greater than 28, in these cases strain tensor is output whatever the Istrain value is.

4.	In case of /PROP/TYPE20, /PROP/TYPE21, /PROP/TYPE22 and Isolid =15, syntax becomes:

/ANIM/BRICK/TENS/STRAIN/0j0