|
»Click here to display Table of Contents«
|
shres (Not Recommended for use in 10.0 or Later Versions) |
|
|
|
|
|
shres (Not Recommended for use in 10.0 or Later Versions) |
|
|
|
|
I/O Options Entry
SHRES - Output Control
Description
The SHRES command can be used in the I/O Options section to control the frequency of output of the state files (.sh file and the .grid file).
Format
SHRES = frequency
Argument |
Options |
Description |
|
frequency |
<FIRST, LAST, Default = LAST |
FIRST: |
The files are output for the first iteration only. |
LAST, blank: |
The files are output for the final iteration only. |
||
FL: |
The files are output for both the first and last iterations. |
||
ALL: |
The files are output for all iterations. |
||
NONE: |
The files are not output. |
||
N: |
The files are output for the first and last iterations and for every Nth iteration. If N = 5, output occurs for iterations 0, 5, 10, 15, 20, and so on, and the final iteration. All equation and combination responses are output. |
||
Comments
| 1. | When a SHRES command is not present, state files are output for the final iteration only. |
| 2. | The .grid file is only output for shape, topography, and free-shape optimization. |
| 3. | For all .sh and .grid output files bar the last one, the files are named <prefix><iter#>.sh(.grid). The last one is just named <prefix>.sh(.grid). |
| 4. | The .grid file output may also be controlled by the GRID keyword on the OUTPUT card. |
| 5. | From 10.0 onwards, it is recommended to use the OUTPUT I/O Option entry to control this output. |
See Also:
