|
»Click here to display Table of Contents«
|
SUPORT1 |
|
|
|
|
|
SUPORT1 |
|
|
|
|
|
»Click here to display Table of Contents«
|
SUPORT1 |
|
|
|
|
|
SUPORT1 |
|
|
|
|
Bulk Data Entry
SUPORT1 – Fictitious Support, Alternate Form
Description
Defines determinate reaction degrees-of-freedom in a free body.
Format
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
(8) |
(9) |
(10) |
SUPORT1 |
SID |
ID1 |
C1 |
ID2 |
C2 |
ID3 |
C3 |
|
|
|
Field |
Contents |
SID |
Set identification number. See comment 1. No default (Integer > 0) |
ID# |
Grid point identification number. No default (Integer > 0) |
C# |
Component numbers. No default (Any unique combination, with no embedded blanks, of the integers 1 through 6 for grid points; or 0 for scalar points) |
| 1. | SUPORT1 bulk data entries will not be used in the model unless specifically selected in the subcase information section by the SUPORT1 subcase information entry. |
| 2. | SUPORT bulk data entries are applied in all subcases. |
| 3. | The degrees-of-freedom specified on SUPORT1 will be combined with those on the SUPORT entry. |
| 4. | The SUPORT/SUPORT1 entries contain a single "P", spelling them as "SUPPORT/1" using two P's is incorrect. |
| 5. | Degrees-of-freedom specified on this entry cannot be defined as dependent degrees-of-freedom on rigid body elements or constrained using SPCi entries or PS on the GRID entries. |
| 6. | This card is represented as a constraint load in HyperMesh. |
See Also:
