HyperMesh and BatchMesher

Visualization Toolbar

Visualization Toolbar

Previous topic Next topic No expanding text in this topic  

Visualization Toolbar

Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

On the Visualization toolbar, you can control how HyperMesh visualizes entities in the graphics area. For example, you can set the geometry and mesh color mode on the Visualization toolbar. To turn the Visualization toolbar on and off, click View > Toolbar > Visualization.

visualization_toolbar

The table below describes the behavior of each tool button on the Visualization toolbar.

Button

Left-click

LEFT Behavior

Right-click

RIGHT Behavior

by_auto

Pick a different mode

Automatically selects one of the following color modes based on the currently active panel.

You can change all of the colors in the Options > Colors panel. To access this panel, click Preferences > Colors from the menu bar, or press <o>.

Same

 

by_assembly_geom

Pick a different mode

All surfaces are colored based on the assemblies they belong to. Each assembly receives a different color (although models with many assemblies may have colors repeated for more than one assembly). Any surfaces that do not belong to an assembly are colored gray.

To change an assembly's color, right-click its color box in the Model browser or Entity Editor and select a new color.

Same

 

by_part_geom

Pick a different mode

All surfaces are colored based on the parts they belong to. Any surfaces that do not belong to a part receive the color assigned to the master model.

Same

 

by_comp

Pick a different mode

Changes the color of all surfaces and solid faces to the color assigned to the component in which that geometry resides. All surface edges and solid face edges are colored black.  A component's color can be changed in the Model Browser > Component View.

Same

 

by_topo

Pick a different mode

Surfaces are colored gray (2D faces (topo) with surface edges colored by topology: red (free edges), green (shared edges), yellow (t-junctions), or blue (suppressed edges).  Solid faces and face edges are colored transparent green (bounding faces) with internal faces colored yellow (full partition faces).

Same

 

by_2d_topo

Pick a different mode

Surfaces are colored gray (2D faces (topo) with surface edges colored by topology: red (free edges), green (shared edges), yellow (t-junctions), or blue (suppressed edges).  Solid faces and face edges are colored blue, ignoring solid topology.

Same

 

by_3d_topo

Pick a different mode

Surfaces and surface edges are colored blue, ignoring surface topology.  Solid faces and face edges are colored transparent green (bounding faces) with internal faces colored yellow (full partition faces).

Same

 

mixed

Pick a different mode

Surfaces are colored by component with surface edges colored by topology.  Solid faces are colored by component with solid face edges colored by topology.

Same

 

new_mappable

Pick a different mode

Surfaces display in wireframe mode, with surface edges colored blue (ignoring topology).  Solid faces are colored by mappability: red (not mappable), yellow (1d mappable), or green (3d mappable).  Solid face edges are colored by topology.

Same

 

visualizationGeometryShadedWithEdges-24

Shaded Geometry with Surface Edges

Button: set geometry mode to shaded with surface edges.

Arrow (lower-right): Select option from menu

Same

 

visualizationGeometryShaded-24

Shaded Geometry

Button: set geometry mode to shaded.

Arrow (lower-right): Select option from menu

Same

 

visualizationGeometryWireframeWithSurfaceLines-24

Wireframe Geometry with Surfaces Lines

Button: set geometry to wireframe with surface lines.

Arrow (lower-right): Select option from menu

Same

 

visualizationGeometryWireframe-24

Wireframe Geometry

Button: set geometry to wireframe mode.

Arrow (lower-right): Select option from menu

Same

 

visualizationTransparency-24

Transparency

Opens the Transparency panel.

Same

 

by_part

Pick a different mode

All elements are colored based on the parts they belong to. Any elements that do not belong to a Part receive the color assigned to the master model.

Same

 

by_comp2

 

Pick a different mode

All elements are colored by the color assigned to the component in which that element resides.  A component's color can be changed in the Model Browser by right-clicking its color box and picking a new color.

Same

 

by_prop2

Pick a different mode

All elements are colored by the property assigned to that element.  Properties are assigned to elements directly or indirectly.  Properties are assigned directly to the element by using the Property > Assign panel.  Indirect element properties are inherited from the component in which the element resides; component properties are assigned in the Component > Assign panel.  Directly assigned properties override indirect ones.  Solvers in group #1 (RADIOSS (Bulk Data), OptiStruct, Nastran) can support both direct and indirect element property assignment.  Solvers in group #2 (RADIOSS (Block), LS-DYNA) only support indirect element property assignments.  Any element without a property is colored gray.  A property's color can be changed in the Model Browser by right-clicking its color box and picking a new color.

Same

 

by_mat2

Pick a different mode

All elements are colored by the material assigned to that element.  Materials are assigned to elements differently for solver group #1 and solver group #2;  Solver Group #1 (RADIOSS (Bulk Data), OptiStruct, Nastran) assign materials to properties, and then properties to elements (either directly or indirectly as discussed in Color by Property).  Elements with both direct and indirect property assignments use the material associated with the direct element property assignment.  Solver group #2 (RADIOSS (Block), LS-DYNA) assigns materials to elements indirect by assigning materials to the component in which the element resides using the Component > Assign panel.  Any element which does not have a material assigned to it, directly or indirectly, will be colored gray.  A material's color can be changed in the Model Browser by right-clicking its color box and picking a new color.

Same

 

by_assem2

Pick a different mode

All elements are colored based on the assemblies they belong to.  Each assembly receives a different color (although models with many assemblies may have colors repeated for more than one assembly).  Any elements that do not belong to an assembly are colored gray.  An assembly's color can be changed in the Model Browser by right-clicking its color box and picking a new color.

Same

 

by_1d2d3d

Pick a different mode

All elements are colored by their topology: green (1D), blue (2D), and red (3D).

Same

 

by_config

Pick a different mode

All elements are colored by their element configuration (mass, reb2, spring, bar, rod, gap tria3, quad4, tetra4, and so on).  An element's configuration color can be changed from the Element Types panel.

Same

 

by_thickness

Pick a different mode

Shell elements are colored according to their thickness values. Both element as well as node thicknesses are supported. A thickness legend is shown in the upper-left corner of the graphics area.

Thickness coloring can be combined with 2D Detailed Element Representation.

nodal_thickness

Element Thickness with 2D Detailed Representation

element_thickness

Nodal Thickness with 2D Detailed Representation

Same

 

element_by_quality

Pick a different mode

Left-click the tool button to open the Element Quality View mode in the graphics area.

This permanent mode serves as a useful tool to investigate each specific element criteria, as well as evaluate the overall quality of a mesh.

Same

 

by_domain

Pick a different mode

All elements are colored based on the domains they belong to. A domain is a morphing entity which enables design changes to an existing FE topology. Each domain receives a different color. Any elements that do not belong to a domain are colored gray. A domain color can be changed in the Model Browser by right-clicking its color box and picking a new color.

Same

 

visualizationElementsShadedWithMesh-24

Shaded Elements with Mesh Lines

Set current element visual mode to shaded with mesh lines.  Elements are shaded, and surface mesh lines display.

Left-click the lower right arrow to expand the Options Menu.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

visualizationElementsShadedWithFeatures-24

Shaded Elements with Feature Lines

Set current element visual mode to shaded with feature lines. Elements are shaded but have no mesh lines, while feature lines display.

Left-click the lower right arrow to expand the Options Menu.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

visualizationElementsShaded-24

Shaded Elements

Set current element visual mode to shaded. Elements are shaded, but no lines display.

Left-click the lower right arrow to expand the Options Menu.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

visualizationElementsWireframeSkinOnly-24

Wireframe Elements (skin only)

Set the current element visual mode to wireframe (skin only).  Internal mesh lines will not display.

Left-click the lower right arrow to expand the Options Menu.

Select option from menu

Right-click  to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

visualizationElementsWireframe-24

Wireframe Elements

Set the current element visual mode to wireframe.  Internal and surface mesh lines display.

Left-click the lower right arrow to expand the Options Menu.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

visualizationElementsTransparent-24

Transparent Elements and Feature Lines

Set current element visual mode to transparent with elements and feature lines.  Elements are shaded but transparent, no mesh lines display, but feature lines do.

Left-click the lower right arrow to expand the Options Menu.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

1d_traditional_element_representation

1D Traditional Element Representation

Display a simple representation for 1D beam elements.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

1d_detailedl_element_representation

1D Detailed Element Representation

Display a more detailed, shaped-based representation for 1D beam elements.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

1d_detailed_traditional_element_representation

1D Traditional and Detailed Element Representation

Display both the simple and detailed representations for 1D beam elements.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

2d_traditional_element_rep

2D Traditional Element Representation

Display a simple representation for 2D shell elements.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

2d_detailed_element_rep

2D Detailed Element Representation

Display a more detailed, shaped-based representation for 2D shell elements.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

2d_detailed_traditional_element_rep

2D Traditional and Detailed Element Representation

Display both the simple and detailed representations for 2D shell elements.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform icon’s left behavior.

visualizationPlyStandard-24

Layers off

Ply layers are not displayed.

visualizations_composite_nolayers_simple

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform the icon’s left behavior.

visualizationPlyThickness-24

Composite layers

Plies in a composite material are displayed.

visualizations_composite_layers_simple

The exact nature of the display depends on the 2D Element Representation button. See Element and ply visualization for details.

For continuum shells the display can be overlaid with the transparent representation of the original continuum shell elements, if 2D Traditional Element Representation (2d_traditional_element_rep) is turned on.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform the icon’s left behavior.

visualizationPlyThicknessWithDirection-24

Composite layers with fiber direction

Display layers with vectors indicating their appropriate ply orientation.  Corrected fiber directions are shown if the drape data is available on every element of the ply.

visualizations_composite_layers_fibers_simple

The exact nature of the display depends on the 2D/3D element visualization button. See Element and ply visualization for details.

For continuum shells the display can be overlaid with the transparent representation of the original continuum shell elements, if 2D Traditional Element Representation (2d_traditional_element_rep) is turned on.

Select option from menu

Right-click to expand Options Menu; Left-click an icon to set new current icon and perform the icon’s left behavior.

layer_edges_icon

Layer Edges

Enables the ply lay-up or stack boundaries to be visualized, which provides an easy way to view ply drop-off. When the stack topology shape is changed, the visualization of the edges is automatically updated. Ply layer geometry edges are always outlined in white, where as FE edges are always outlined in  the same color as the ply. FE edges are always outlined with a thicker line compared to geometry edges.

 

 

visualizationElementsShrink-24

Shrink Elements

Left-click the tool button to toggle on/off shrink elements by shrink factor.  Shrink factor can be set from the Options > Graphics panel.  The Options panel can be accessed from the menu bar; Preferences > Graphics.

Same

 

visualization-24

Visualization Options

Left-click the tool button to open Visualization Controls tab.

Same