Note: | No dot (.), star (*), or double quotes (" ") can be used in names in HyperMesh if the corresponding entities are used in the design parameterization. |
|
ANSYS
DV name
|
Description
|
Mass
|
Mass of Mass21 elements stored at the MASS21p property card.
|
Thickness
|
The following element types can have constant thickness defined at component card:
PLANE2, PLANE42, PLANE82, PLANE145, PLANE183, PLANE182, SHELL28
The following element types can have variable thickness defined at component card:
SHELL41, SHELL43, SHELL57, SHELL93, SHELL143, SHELL150, SHELL157, SHELL181, SHELL163
The following are layered elements; each layer can have constant or variable thickness:
SHELL91, SHELL99, SOLID46, SOLID191
|
Ply Angles
|
The following are layered elements; each layer can have a Ply Angle defined:
SHELL91, SHELL99, SOLID46, SOLID191
|
Stiffness
|
Stiffness of Combin14 elements stored at the COMBIN14p property card.
|
Shape
|
HyperMesh shape entities.
|
Nastran/OptiStruct
DV name
|
Description
|
Mass
|
CONM2 and CMASS2 elements mapped as MASS elements in HyperMesh.
|
Thickness
|
The following components can have constant thickness:
PSHELL, PSHEAR
The following components can have variable thickness:
PCOMP
|
Ply Angles
|
PCOMP component can have the Ply Angles defined for each layer.
|
Stiffness
|
The following properties can have stiffness:
PBUSH, PELAS
|
Force
|
Magnitude
|
Moment
|
Magnitude
|
Load
|
The S, S1, S2… values on the loadcols card of type LOAD. The S is displayed as S0 in the model tree.
|
Materials
|
The following material properties are supported:
MAT1: E, G, NU, RHO
MAT2: G11, G12, G13, G22, G23, G33, RHO
MAT8: E1, E2, NU12, G12, G1Z, G2Z, RHO
MAT9: G11, G12, G13, G14, G15, G16, G22,
G23, G24, G25, G26, G33, G34, G35, G36
G44, G45, G46, G55, G56, G66, RHO
|
Shape
|
HyperMesh shape entities.
|
Abaqus
DV name
|
Description
|
Mass
|
The following component card can have Mass:
MASS
|
Thickness
|
The following component cards have constant thickness:
MEMBRANESECTION, RIGID_BODY, GASKETSECTION
The following component cards have multiple layer thickness:
SOLIDSECTION, SHELLSECTION, SHELLGENERALSECT
|
Ply Angles
|
The following component cards have Ply Angles for each layer:
SOLIDSECTION, SHELLSECTION, SHELLGENERALSECT
|
Stiffness
|
The following component cards can have SOLID and SHELL stiffness:
SOLIDSECTION, SHELLSECTION, SHELLGENERALSECT, MEMBRANESECTION
The following component cards can have multiple stiffness:
SPRING, JOINT
Only one stiffness per degree of freedom is supported for JOINTs.
|
Shape
|
HyperMesh shape entities.
|
LS-DYNA
DV name
|
Description
|
Mass
|
LS-DYNA elements mapped as HyperMesh mass elements of type MASS can have mass.
|
Thickness
|
The following property card can have a constant or variable thickness:
SectShll
The following property card can have a layer thickness:
IntShll
|
Ply Angles
|
The following property cards have Ply Angles for each layer:
SectShll
|
Stiffness
|
The following property cards can have ESPH, EST, ESPS stiffness:
JointStff
|
Initial Velocity
|
The VX, VY, VZ, VXR, VYR, and VZR parameters for loadcol of type InitialVal.
|
Curve
|
SFA, SFO, OFFA, OFF0 of curve.
|
Shape
|
HyperMesh shape entities.
|
PAM-CRASH 2G
DV name
|
Description
|
Mass
|
There are several types of mass elements like PLINK, MASS, etc. When the mass element type is MASS, the following are the DVs:
When the mass is defined for an element, only one variable AddM is a DV.
When the mass is not defined while creating the mass element, but it is specified on the card editor as AddMX, AddMY, and AddMZ, these three variables will be the DVs.
|
Thickness
|
PART_2D component card (field h in the card editor).
|
Stiffness
|
Defined on the Material card MAT_1-D for spring stiffness. Material type 220, stiffness Kro, Kso, Kto, Kmro, Kmso, and Kmto are supported.
|
Shape
|
HyperMesh shape entities.
|
RADIOSS
DV name
|
Description
|
Thickness
|
The following property card can have a constant or variable thickness:
SectShll
The following property card can have a layer thickness:
IntShll
|
Initial Velocity
|
The VX, VY, VZ, VXR, and VZR parameters for loadcol of type InitialVal.
|
Curve
|
SFA, SFO, OFFA, OFF0 or curve.
|
Shape
|
HyperMesh shape entities.
|
|