HyperView User's Guide

Extended Entity Selection Menu

Extended Entity Selection Menu

Previous topic Next topic No expanding text in this topic  

Extended Entity Selection Menu

Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

The extended entity selection menu provides a number of entity selection options.  To access the extended selection menu, click the entity type button on the current input collector.

input_collector_w_callouts

Input collector – elements selected

extded_entity_slctn_menu_elmnts

Extended entity selection menu for the Elements entity type

You can then select an option from the extended entity selection menu.  The above image shows all the selection options available in HyperView. However, not all entity types offer all the selection options. Only valid selections for the current entity type are displayed on the menu.  For instance, if you are using the Systems input collector, the By Config, By Dimension, By Sphere, and By Set (Group) entity selection options are not available.

HyperView is capable of entity binding changes between nodes, elements, and components - which provides you with easy selection.  For example, when Nodes is specified in the input collector, the By ID option allows you to select either By Node ID, By Element ID, or By Component ID.  Similarly when selecting nodes, the By Set option allows you to select a node set (group), element set (group), or component set (group).  If you select an element set (group), the nodes connected to the elements defined in the set (group) will be selected.

The extended entity selection menu options are described below:

Displayed

Select entities that are currently displayed in the graphics area for the specified types.

All

Select all entities in a model of the specified type.  When you select All, the set to be added to the user mark includes entities displayed and those not displayed.

Save

Save the current selected set of entities for future use.

Retrieve

Retrieve the current saved selection set of entities.

 

 

Visibility filter

This affects the following options:

 

All

Apply your settings to all entities in the model, regardless if they are displayed on the screen or not.

 

Displayed

Apply your settings to only the entities that are displayed on the model.

By Window

Select entities based on a user-defined multiple-sided polygon on the screen.

elements_selection_by_window

Extended Entity Selection  -- By Window menu for the Elements entity type

Use SHIFT + left mouse button to define the window points. Select points in the graphics area to define a window enclosing the pick handles of the entities to select or exclude.

Select Entities inside the window to highlight the entities within the window.
Select Entities outside the window to highlight entities outside of the window.

Reverse

Allows for a Boolean "not" to be performed on the currently selected entities.  When Reverse is selected, all selected entities are removed from the mark; all entities that are not on the mark are selected.

By ID

Select entities by entering an ID number.

elements_selection_by_id

Extended Entity Selection -- By ID menu for the Elements or Nodes entity type

Make a selection from the By ID drop-down menu (By Node ID, By Element ID, or By Component ID), and then enter a valid expression (listed below) and an ID in the text box.

 

==

Displays entities equal to the ID entered

 

!=

Displays entities not equal to the ID entered

 

<

Displays entities less than the ID entered

 

<=

Display entities less than or equal to the ID entered

 

>

Displays entities greater than the ID entered

 

>=

Display entities greater than or equal to the ID entered

 

NoteYou can also enter IDs and/or ranges, separated by commas (for example: 1, 3, 5-12) in the text box.

In addition, you may also make a selection from the Look in drop-down menu.  When a model contains duplicate IDs, HyperView organizes the model into different pools.  For example, duplicate IDs can be in Solid and Thick Shells in LS-DYNA3D models - therefore you need to specify a pool in order to select a unique element.

If All is used, all the entities with duplicate IDs are selected.

By Dimension

Select entities by dimension.  HyperView displays
0D, 1D, 2D, and 3D from which you can pick one or more.

elements_selection_by_dimension

Extended Entity Selection  -- By Dimension menu for the Elements or Nodes entity type

Setting the input collector to Nodes allows you to select nodes attached to all elements with the selected dimension.  HyperView performs the entity binding changes for proper selection.

By Config

Select elements by configuration.  You can select one or more of the various element configurations available.

elements_selection_by_config

Extended Entity Selection  -- By Config menu for the Elements or Nodes entity type

If Element configuration is selected, HyperView will apply the binding changes to find the nodes connected to the elements.

By Set (Group)

Select from a drop-down menu of created sets/groups.

elements_selection_by_group

Extended Entity Selection  -- By Set menu for the Elements or Nodes entity type

By Adjacent

Select entities adjacent to the entities already selected.  When you select By Adjacent, HyperView includes the entities that are adjacent to the entities already selected.

By Attached

Select entities by specifying an entity among a large group of continuously connected elements.  When you select By Attached, HyperView includes the entities that are attached to the entities already selected.

By Contour

Select entities by contour.

by_contour_options

Extended Entity Selection  -- By Contour menu for the Elements or Nodes entity type

The following contour options are available:

 

Value

Enter a contour value in the text box (see the Note below).

 

Percent

Enter the percentage of entities to select (0 to 100) in the text box (see the Note below).

 

Top N

Enter a positive decimal value for N, where N is the number of entities to be selected.  For example, if you enter 50, the application displays the top 50 elements/nodes that have the highest contour value.

 

Bottom N

Enter a positive decimal value for N, where N is the number of entities to be selected.  For example, if you enter 50, the application displays the bottom 50 elements/nodes that have the lowest contour value.

 

No result

All nodes or elements without any results are selected.

 

Max of Window

Displays the maximum contour value for the entities defined using the Quick Window Selection feature (SHIFT + left mouse button).

 

Min of Window

Displays the minimum contour value for the entities defined using the Quick Window Selection feature (SHIFT + left mouse button).

 

Note:If you select Value or Percent, you must select a quantifier from the bottom, left-most drop-down menu:

 

 

=

Displays entities equal to the contour value/percent entered

 

 

!=

Displays entities not equal to the contour value/percent entered

 

 

<

Displays entities less than the contour value/percent entered

 

 

<=

Display entities less than or equal to the contour value/percent entered

 

 

>

Displays entities greater than the contour value/percent entered

 

 

>=

Display entities greater than or equal to the contour value/percent entered

By Sphere

Allows you to select entities by entering location information for x, y, z and also entering a user-defined radius.

elements_selection_by_sphere

Extended Entity Selection  -- By Sphere menu for the Elements or Nodes entity type

By Face

Select nodes/elements that are located on the same face as the previously selected entity.  A face is defined as a region on the model surface where the angle between element normals does not exceed a certain threshold.  This threshold is controlled by the Feature angle setting.

Limitations:

Works on shell elements only.
Does not handle flipped normals.
Cannot be used to select components.

By Plane

Select nodes/elements that lie within a certain tolerance (in model units) of the defined plane.  This selection method uses a vector input collector (X Axis, Y Axis, Z Axis, Vectors, N1N2N3, Normal to screen).

elements_selection_by_plane

Extended Entity Selection  -- By Plane menu for the Elements or Nodes entity type

 

The following options (listed below) appear on each subpanel of the extended entity selection menu.  You can continue to apply the selection rules until you click Return or move the mouse button out of the dialog to dismiss it.  To clear the selection, click Reset.

Add

Adds entities to the selection set that satisfy the user-defined criteria.

Subtract

Removes entities from the selection set that satisfy the user-defined criteria.

Reset

Removes the selections made and returns the model to its original state.

Return

Returns to the main panel.

Apply

After defining the entity selection set, click Apply to select the entities, apply the desired action, and return to the previous panel.

A default action is one of the following:

Create a vector plot (if invoked from the Vector panel).
Create a tensor plot (if invoked from the Tensor panel).
Mask or unmask elements (if invoked from the Mask panel) based on the mode set in the Mask panel.

 

 

See Also:

Selecting Entities Using the Entity List Tree

Selecting Entities Using the Input Collector

Quick Window Selection