/ALE/MAT

Block Format Keyword

/ALE/MAT - ALE Material

Description

Describes the ALE material.

Field

Contents

mat_ID

Material identifier

(Integer, maximum 10 digits)

Flrd

Modification factor on boundary surfaces fluxes

(Real)

= 0: the fluid transmission is not allowed (default).

= 1: the fluid transmission is totally allowed.

#RADIOSS STARTER

#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|

#- 1. MATERIALS:

#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|

/MAT/LAW37/1

air (unit g_mm_ms)

# RHO_l0 C_l ALPHA_l NU_l NU_VOL_l

.001 2089 0 .001 0

# RHO_G0 GAMMA P0 NU_g NU_VOL_g

1.22E-6 1.4 .1 .00143

/ALE/MAT/1

# Modif. factor.

#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|

#enddata

#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|

1.	If the boundary is not connected to a material specifying an Elementary Boundary Condition (Type 11), the Flrd is by default 0. The flow is reduced otherwise by the Flrd factor value specified at the elementary boundary level.

euler_mat_14