|
»Click here to display Table of Contents«
|
BNDFIX1 |
|
|
|
|
|
BNDFIX1 |
|
|
|
|
|
»Click here to display Table of Contents«
|
BNDFIX1 |
|
|
|
|
|
BNDFIX1 |
|
|
|
|
Bulk Data Entry
BNDFIX1 – Fixed Boundary Degrees-of-Freedom of a Superelement Assembly
Description
Defines the fixed (B-set) degrees-of-freedom to be fixed during DMIG generation using CMSMETH card.
Format
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
(8) |
(9) |
(10) |
BNDFIX1 |
C |
GID1 |
GID2 |
GID3 |
GID4 |
"thru" |
GID6 |
GID7 |
|
|
GID8 |
GID9 |
etc. |
|
|
|
|
|
|
|
Field |
Contents |
C |
Component numbers. No default (Integer > 0 or blank). Zero or blank for SPOINT and any unique combination of integers 1 through 6 for grid points with no embedded blanks. |
GIDi |
Grid of scalar point identification numbers. No default (Integer > 0) |
THRU |
Keyword to allow a range of GID. THRU can be in any field. |
| 1. | BNDFIX1 and BSET1 are equivalent. |
| 2. | The combination of the three ASET/ASET1, BNDFIX/BNDFIX1 and BNDFREE/BNDFRE1 are not allowed together in the same input data. |
| 3. | If BNDFREE/BNDFRE1 and ASET/ASET1 are present, the DOFs associated with ASET will be in the B-set; except the DOF assigned to BNDFREE which will be in the C-set. |
| 4. | If BNDFIX/BNDFIX1 and ASET/ASET1 are present, the DOFs associated with ASET would be in C-set; except the DOF assigned to BNDFIX which will be in the B-set. |
| 5. | Multiple “THRU” sequences can be used on a single card, and can span across continuation lines. |
| 6. | If the "THRU" comment is used, G1 and G2 must exist, but the grid points between G1 and G2 are not required to exist. |
See Also:
