|
»Click here to display Table of Contents«
|
NSGE1 |
|
|
|
|
|
NSGE1 |
|
|
|
|
|
»Click here to display Table of Contents«
|
NSGE1 |
|
|
|
|
|
NSGE1 |
|
|
|
|
Bulk Data Entry
NSGE1 – Non-structural Material Damping, Alternate Form 1
Description
Defines non-structural material damping for a list of elements or properties.
Format
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
(8) |
(9) |
(10) |
NSGE1 |
SID |
TYPE |
VALUE |
ID |
ID |
ID |
ID |
ID |
|
|
ID |
ID |
ID |
etc |
|
|
|
|
|
|
|
Field |
Contents |
SID |
Non-structural material damping set identification number. No default (Integer > 0) |
TYPE |
This can be one of the properties PSHELL, PCOMP, PBAR, PBARL, PBEAM, PBEAML, PROD, CONROD, PSHEAR, or PTUBE, in which case the list of IDs will refer to properties of the stated type, or it can be ELEMENT, in which case the list is of individual element IDs of elements with the specified non-structural material damping value. It can also be of type ELSET, in which case, it is an element SET ID. When set to PSOLID, fluid elements are currently not supported. No default (PSOLID, PSHELL, PCOMP, PBAR, PBARL, PBEAM, PBEAML, PROD, CONROD, PSHEAR, PTUBE, ELEMENT, or ELSET). |
ID |
Property, Element ID, or Element Set ID depending on the TYPE definition. No default (Integer > 0, or "THRU") |
VALUE |
Non-structural material damping value. No default (Real) |
| 1. | Non-structural material damping in this format must be selected by the NSGE Subcase Information selector. |
| 2. | Optimization is currently not supported for non-structural damping. |
See Also:
