(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

RADPRM

PARAM1

VALUE1

PARAM2

VALUE2

PARAM3

VALUE3

PARAM4

VALUE4

PARAM5

VALUE5

Field

Contents

PARAMi

Name of parameter. See below for valid names.

VALi

Value of parameter.

HMMOVE

Controls the element conversion method in geometric nonlinear analysis.

<YES or NO>

Default = NO

HMNAME

Controls the conversion of the component, property and material names in geometric nonlinear analysis.

<YES or NO>

Default = NO

NLAFILE

Controls the output of animation files (A-File) in geometric nonlinear analysis.

<YES or NO>

Default = NO

NLRFILE

Controls the output of restart files (R-File) in geometric nonlinear analysis.

<YES or NO>

Default = NO

NLRUN

Controls whether the geometric nonlinear analysis subcases run automatically after these subcases in bulk format are converted into block format.

<YES or NO>

Default = YES

RBE2RBD

RBE2 is converted to /RBE2 by default in geometric nonlinear analysis. This parameter can be used to convert RBE2 to /RBODY, instead of /RBE2.

<YES or NO>

Default = NO

SH4NRP

Controls the full projection of 4-node shell elements in NLGEOM implicit analysis.

<0, 1, 2>

Default = 0 in NLGEOM subcase

Default = 1 in IMPDYN subcase

SMDISP

Used to specify if small displacement formulation or large displacement formulation is used.

<0, 1>

Default = 0

SNAPTHRU

Controls the output of the force-deflection curve in geometric nonlinear analysis.

<YES or NO>

Default = NO

XPENTA15

Controls the support of the second order PENTA element with 15 nodes in geometric nonlinear analysis.

<0, 1>

Default = 0