temperatures

Unless otherwise specified, data names are accessible in level 3 only.

attributesmax
The number of attributes owned by this entity. Type: integer
baselocation
The coordinates where the load on a component or set should display. Valid for hm_getvalue query only.
Also used to convert the load vector components into local values for non-rectangular coordinate systems.
Type: triple double
baselocationx
The x-coordinate where the load on a component or set should display.
Also used to convert the load vector components into local values for non-rectangular coordinate systems.
Type: double
baselocationy
The y-coordinate where the load on a component or set should display.
Also used to convert the load vector components into local values for non-rectangular coordinate systems.
Type: double
baselocationz
The z-coordinate where the load on a component or set should display.
Also used to convert the load vector components into local values for non-rectangular coordinate systems.
Type: double
collector
Pointer to the collector that owns the load.
Type: pointer(levels 2, 3, and 4)
component
Pointer to the component when the load is applied to a component.
Type: pointer
config
The value 5 for temperature loads.
Type: integer
curveid
The ID of the curve defining the load magnitude when a curve has been used to define the load.
Type: integer
definedentity
True if the entity is defined, false otherwise.
Type: Boolean
entityid
The ID of the entity the load is attached to.
Type: integer
entitytype
The type of the entity to which the load is applied.
  • 1 - node
  • 2 - elem
  • 3 - comp
  • 10 - set
  • 27 - point
Type: integer
entitytypename
The string type of the entity to which the load is applied.
  • nodes
  • elems
  • comps
  • sets
  • points
Type: string
id
The ID of the entity. Type: integer
include
The ID of the include file the entity is organized in. Type: integer
includeid
The ID of the include file the entity is organized in. Type: integer
internalid
The ID of the entity. Type: integer
inputsystem
Pointer to the reference system.
Type: pointer
inputsystemid
The ID of the reference system.
Type: integer
internalid
The ID of the entity.
Type: integer
mappedid
The ID of the original load on geometry.
Type: integer
node
Pointer to the node when the load is applied to a node.
Type: pointer
set
Pointer to the set when the load is applied to a set.
Type: pointer
temperature
The value of the temperature load.
Type: double
type
The solver dependent type code for the element. Type: integer
typename
The solver dependent type name for the element. Type: string
xscale
The x scale or time scale of the load curve when a curve has been used to define the load.
Type: double