|
»Click here to display Table of Contents«
|
ESLTADD |
|
|
|
|
|
ESLTADD |
|
|
|
|
|
»Click here to display Table of Contents«
|
ESLTADD |
|
|
|
|
|
ESLTADD |
|
|
|
|
Bulk Data Entry
ESLTADD – Combination of selected time steps for Geometric Nonlinear ESLM Optimization or a Multi-body Dynamics ESLM Optimization
Description
Defines a combined time step selection set as a union of selected time steps defined via ESLTIME entries for Geometric Nonlinear ESLM optimization or a Multi-body Dynamics ESLM optimization.
Format
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
(8) |
(9) |
(10) |
ESLTADD |
SID |
S1 |
S2 |
S3 |
S4 |
S5 |
S6 |
S7 |
|
|
S8 |
S9 |
etc. |
|
|
|
|
|
|
|
Field |
Contents |
SID |
Set identification number. (Integer > 0) |
Si |
Set identification numbers of time step selections defined via ESLTIME bulk data entries. Si should be unique and may not be the identification number of a set defined by another ESLTADD entry. (Integer > 0) |
| 1. | ESLTADD can be selected within the subcase information section using the command ESLTIME=SID. |
| 2. | ESLTADD entries take precedence over ESLTIME entries. If both entries have the same SID, only the ESLTADD entry will be used. |
| 3. | This card is represented as a loadcollector in HyperMesh. |
See Also:
