Location: Advanced Joints panel - Geometry2 tab - Cone
This option is only available on the Geometry2 tab!
Advanced Joints panel – Geometry2 tab for a ConstraintMate joint with a Geometry 2 Cone type
Geometry2
Body 2 |
select the second body constrained by the constraint mate. |
Point |
the base point of the Cone (see note below). |
Point|Vector |
the Point or Vector that defines the axis of the Cone. |
JRadius |
the radius of the cone base. |
Height |
the height of the cone. |
Note | The marker on Body 2 (J Marker) is defined at the base of the Cone and the Z axis of the marker is oriented along the direction defined by the Point|Vector that defines the cone height. |