The MotionView tool buttons are displayed on the various toolbars when a model is loaded in the active window. A summary of each model tool is presented below and a description of each panel follows:
Sets options for graphic entities. |
||
Submits a solver run. |
||
Sets the graphic screen selection mode. |
||
Allows you to create and save systems/assemblies, to modify system/assembly attachments, and to set system options and initial conditions. |
||
|
Allows you to create and save an analysis, to modify analysis attachments, and to set analysis options and initial conditions. |
|
Allows you to create command sets for the solver-command file. The command sets for a model are order dependent since they define the contents of the solver command file. |
||
Allows you to create points and to edit point coordinates. |
||
Allows you to edit the mass properties, orientation rules, and initial conditions for bodies. |
||
Allows you to create vectors and to edit vector components. |
||
Allows you to create markers and to edit location and orientation rules for markers. |
||
Allows you to create and edit curves. Curves hold x-y data for nonlinear properties. This panel has similar options as the Define Curves panel in HyperGraph. |
||
Allows you to add and edit three dimensional spline data. |
||
Allows you to change the graphical attributes of entities in your model. Graphical attributes include color, state, and rendering method. |
||
Allows you to create surfaces for use with advanced joint entities. |
||
Allows you to create and edit deformable curves. These curves can change their shape during the simulation and can be used with advanced joints and contacts. |
||
Allows you to create and edit deformable surfaces. These entities can change shape during the simulation and can be used with advanced joints and contacts. |
||
Allows you to edit properties, connectivity, orientation rules, and initial conditions for joints. |
||
Allows you to create motions and to edit the initial conditions, displacements, velocities, and acceleration of joints. |
||
Allows you to edit joint couplers. |
||
Allows you to create a gear entity to relate the motion of two joints. |
||
Allows you to create a set of joints where points, curves and surfaces stay in contact throughout the simulation. |
||
Allows you to create forces and to edit the orientation and properties of forces. |
||
Allows you to create modal forces and to edit the orientation and properties of forces. |
||
Allows you to edit the orientation, connectivity, stiffness, damping, and preloads of bushings. |
||
Allows you to create and edit fields to relate forces between two bodies. |
||
Allows you to edit the connectivity, properties, and initial conditions of springs and dampers. |
||
Allows you to edit the connectivity, properties, and orientations of beams. |
||
Allows you to edit the connectivity, properties, and points of a polybeam. |
||
Allows you to set contact data. |
||
Allows you to set solver variable data. |
||
Allows you to set solver array data. |
||
Allows you to set solver string data. |
||
Allows you to set solver differential equations. |
||
Allows you to set control entity data. |
||
Allows you to create and edit a sensor entity to modify the solver behavior during simulation. |
||
Allows you to set control state equations. |
||
Allows you to create and edit output and requests such as displacement, velocity, acceleration, and force. |
||
Allows you to access user-defined datasets. |
||
Allows you to insert segments of text into your model. |
||
Allows you to edit data stored in user-defined panels. |