hm_getelemcheckvalues

Syntax

hm_getelemcheckvalues mark_id dimension check_type ?time_failure?

Type

HyperMesh Tcl Query

Description

This command returns a single list containing alternating values of element IDs and the corresponding check value for that element. Only the elements on mark_id and of the specified dimension are considered when determining which elements and values are returned.

Inputs

mark_id

The ID of the mark containing the elements. Valid values are 1 and 2.

dimension

The dimension of the elements on mark_id to consider. Valid values are:

1 – 1D elements

2 – 2D elements

3 – 3D elements

If no elements of the specified dimension are on mark_id, an error is returned.

check_type

The type of element check to return the bounds from. The allowable values depend on the dimension specified:

dimension = 1:

length
timestep

dimension = 2:

addedmass
aspect
cellsquish
chordaldev
equiskew
jacobian
length
maxinterangle
mininterangle
skew
taper
timestep
volumeareaskew
warpage

dimension = 3:

addedmass
altitudeaspect
aspect
cellsquish
equiskew
jacobian
length
maxinterangle
mininterangle
skew
tetracollapse
timestep
volumeareaskew
volumetricskew
warpage

?time_failure?

The value to use as a threshold beyond which the input elements should be considered to have failed the test. This is required only when check_type is set to addedmass.

Examples

To get the length value for all 1D elements in comp1:

*createmark elems 1 "by collector name" comp1
set elemvals [hm_getelemcheckvalues 1 1 length]

To get the warpage value for all displayed 2D elements:

*createmark elems 1 displayed
set elemvals [hm_getelemcheckvalues 1 2 warpage]

To get the jacobian of all 3D elements:

*createmark elems 1 all
set elemvals [hm_getelemcheckvalues 1 3 jacobian]

Errors

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

Version History

10.0