hm_wadlinessetaxes

Sets the origin and coordinate axes for a WAD lines analysis.

Syntax

hm_wadlinessetaxes origin_x origin_y origin_z forward_x forward_y forward_z left_x left_y left_z

Type

HyperWorks Tcl Query

Description

Sets the origin and coordinate axes for a WAD lines analysis.

Inputs

origin_x origin_y origin_z
Defines the X, Y and Z coordinates of the origin. Must be at the vehicle centerline (default 0,0,0).
forward_x forward_y forward_z
Defines the vector pointing toward the front of the vehicle (default 1,0,0).
left_x left_y left_z
Defines the vector pointing toward the left side of the vehicle (default 0,1,0).

Example

To setup and extract WAD lines data:

hm_wadlinesinit
hm_wadlinessetparameters 45.0 50.0 100.0 100.0 50.0 20.0 25.0 60.0
hm_wadlinessetaxes 0.0 0.0 0.0 1.0 0.0 0.0 0.0 1.0 0.0
*createmark comps 1 "bonnet" "bumper" "fenderL" "fenderR"
*createmark comps 2 "windshield" "a-pillars"
hm_wadlinessetentities comps 1 comps 2
*createmark elems 1 "by collector" wipers
hm_wadlinessetwipers elems 1 0 1
hm_wadlinesgetreferenceline 0
hm_wadlinesgetreferenceline 1
hm_wadlinesgetreferenceline 2
hm_wadlinesgetreferenceline 3
hm_wadlinesgetreferenceline 4
hm_wadlinesgetreferenceline 5
hm_wadlinesgetreferenceline 6
hm_wadlinesgetreferenceline 7
hm_wadlinesgetwadline 1000.0
hm_wadlinesgetwadline 1500.0
hm_wadlinesgetwadline 1700.0
hm_wadlinesgetwadline 2100.0
hm_wadlinesgetgridpoints 1000.0 1500.0 1700.0 2100.0 50.0
hm_wadlinesend

Errors

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:
if { [ catch {command_name...} ] } {
   # Handle error
}

None.

Version History

12.0.110