hm_compareentitiesrotate

Syntax

hm_compareentitiesrotate source_entity_type source_mark_id target_entity_type target_mark_id tolerance vec_x vec_y vec_z base_x base_y base_z angle steps ?result_type? ?review_results?

Type

HyperMesh Tcl Query

Description

Generates comparison results for entities rotated about an axis. This may find multiple matches, depending on the requested options. This must be preceded by a call to hm_compareinit.

These results can then be queried using hm_compareget* APIs, or written to a file using hm_comparewrite* APIs.

Inputs

source_entity_type

The type of source entity. Valid values are surfs or elems.

source_mark_id

The ID of the mark containing the source entities. Valid values are 1 and 2.

target_entity_type

The type of target entity. Valid values are surfs or elems.

target_mark_id

The ID of the mark containing the target entities. Valid values are 1 and 2.

tolerance

The tolerance value to use for the comparison.

vec_x

X-coordinate of a location along rotation vector.

vec_y

Y-coordinate of a location along rotation vector.

vec_z

Z-coordinate of a location along rotation vector.

base_x

X-coordinate of rotation vector base.

base_y

Y-coordinate of rotation vector base.

base_z

Z-coordinate of rotation vector base.

angle

The rotation angle to use for searching for matches.

steps

The number of steps to consider. This dictates how many increments of angle are searched for matches. For example, if angle is 45 and steps is 3, the angles 45, 90 and 135 will be searched. Must be >= 1.

result_type

	SURFS to SURFS	SURFS to ELEMS ELEMS to SURFS	ELEMS to ELEMS
0 - Basic	Matched (paired) Unmatched	Matched (paired) Unmatched	Matched Unmatched
1 - Full (default)	Matched (paired) Overlapped Intersected Unmatched	Matched (paired) Overlapped Intersected Unmatched	Matched Overlapped Intersected Unmatched
2 - Detailed	Matched (paired) Overlapped (paired) Intersected (paired) Unmatched	Matched (paired) Overlapped (paired) Intersected (paired) Unmatched	Matched Overlapped Intersected Unmatched

review_results

0 - Do not automatically show the graphical comparison results after execution.

1 - Automatically show the graphical comparison results after execution (default). This is cleared upon a call to hm_compareend.

Example

To write the detailed comparison results file to C:/temp/my_compare.txt for the rotational comparison using an angle of 45 and 6 steps, of surfs 1-20 and 101-120 about the y-axis at 0,0,0:

*createmark surfs 1 1-20
*createmark surfs 2 101-120
hm_compareinit
hm_compareentitiesrotate surfs 1 surfs 2 0.1 0 1 0 0 0 0 45 6 2 0
hm_comparewriteresults C:/temp/my_compare.txt
hm_compareend

Errors

if { [ catch {command_name...} ] } {
   # Handle error
}

Version History

12.0