hm_getelementsqualityinfo

Syntax

hm_getelementsqualityinfo elementmask criteria_use_mode failed_mask ?panel_sensitive?

HyperMesh Tcl Query

Computes quality parameters for the specified selection of elements.

elementmask: The markmask of the input element (1 or 2).
criteria_use_mode: 1 The quality criteria must be explicitly set beforehand. If the parameter is not given, 1 is used as the default value.; 0 The default quality criteria adjusted to the selected averaged element size are automatically created if the criteria do not exist.
failed_mask: The markmask of the failed element (0, 1, or 2). If not specified, 0 is used. Must be different from elementmask.
panel_sensitive: Can be used when multiple panel levels have been pushed, either using the shortcut function keys, or the hm_pushpanel command. This option determines whether to use the current panel or the previous panel for the operation. This option is relevant only when the mark has been created from a panel entity selector under the above conditions. Valid options are:; 0 – Use the previous panel.; 1 – Use the current panel (default).

Output values are organized in the following list:

total number of elements on the markmask

number of failed elements

quality index

% of failed elements

% of trias

None.