*appendmarksolverdata
Appends a mark with entities of the given type that match a defined pattern of identifying information.
Syntax
*appendmarksolverdata EntityType SolverNumber MarkID Arg1 Arg2 Arg3 Arg4…
Type
HyperMesh Tcl Modify
Description
Appends a mark with entities of the given type that match a defined pattern of identifying information.
Inputs
- EntityType
- The type of entities to add to the mark. See details below for different entities supported.
- SolverNumber
- A unique number for each solver that HyperMesh interfaces with:
- 70 - ACTRAN
- 2 - Abaqus
- 8 - ANSYS
- 4 - Autodv
- 10 - Deform
- 1 - Dytran
- 9 - LS-DYNA3D
- 11 - HFSolver
- 19 - HyperXtrude
- 17 - Ideas
- 1 - OptiStruct
- 22 - MADYMO3D
- 3 - Marc
- 8 - ANSYS
- 16 - Moldflow
- 1 - Nastran
- 6 - PAM-CRASH
- 18 - PAM-CRASH
- 21 - Permas
- 20 - RADIOSS
- markID
- The mark ID to which the entities found by this command will be appended.
- Arg1, Arg2, …
- Various arguments that vary based on entity type.
For each entity, the attribute # in the solver template and its value need to be defined in
pair. Refer to the Templates section of the Reference Guide to learn more about
attributes and their values.
| Entity Type | arg1 | arg2 | arg3 | arg4 | arg5 | arg6 |
|---|---|---|---|---|---|---|
| NODES | unused | attrib1 | value1 | ... | ||
| ELEMS | config | type | attrib1 | value1 | ... | |
| COMPS | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| LINES | unused | attrib1 | value1 | ... | ||
| SURFS | unused | attrib1 | value1 | ... | ||
| LOADS | config | type | entitytype | attrib1 | value1 | ... |
| SYSTS | unused | 0-any definitioncode 1-coordinate based 2-node based (see below) |
0-any type 1-rectangular 2-cylinder 3-spherical |
attrib1 | value1 | ... |
| LOADCOLS | Card Image/ Template Tag | loadstepid | attrib1 | value1 | ... | |
| SYSTCOLS | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| SETS | Card Image/ Template Tag | entitytype 1000-justrlink nodesets 1001-omit rlink nodesets |
0-any set 1-unordered 2- ordered 3-formula |
attrib1 | value1 | ... |
| PROPS | Card Image/ Template Tag | attrib1 | 3-formula value1 |
... | ||
| Groups | config | type | ttag | loadstepid | attrib1 | value1 |
| Groups - rwalls | config=5 | type | ttag | loadstepid | geometrytype | motiontype (see below) |
| Plots | unused | attrib1 | value1 | ... | ||
| Curves | unused | attrib1 | value1 | ... | ||
| Blocks | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Mats | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Assems | unused | attrib1 | value1 | ... | ||
| Titles | unused | attrib1 | value1 | ... | ||
| Vectorcols | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Vectors | unused | attrib1 | value1 | ... | ||
| Equations | unused | config | attrib1 | value1 | ... | |
| Cards | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Outputblocks | unused | loadstepid | entitytype | attrib1 | value1 | ... |
| Outputblocks (elems) | unused | loadstepid | 2 | class (see note) | attrib1 | value1 |
| Loadsteps | unused | attrib1 | value1 | ... | ||
| HM_points | unused | attrib1 | value1 | ... | ||
| HM_splines | unused | attrib1 | value1 | ... | ||
| Sensors | unused | attrib1 | value1 | ... | ||
| Designvars | config | attrib1 | value1 | ... | ||
| Beamsectcols | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Beamsects | unused | attrib1 | value1 | ... | ||
| Optitableentrs | unused | attrib1 | value1 | ... | ||
| Optifunctions | unused | attrib1 | value1 | ... | ||
| Optiresponses | unused | attrib1 | value1 | ... | ||
| Dvprels | unused | attrib1 | value1 | ... | ||
| Opticonstraints | unused | attrib1 | value1 | ... | ||
| Desvarlinks | unused | attrib1 | value1 | ... | ||
| Objectives | unused | attrib1 | value1 | ... | ||
| Controlvols | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Multibodies | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Ellipsoids | unused | attrib1 | value1 | ... | ||
| Opticontrols | unused | attrib1 | value1 | ... | ||
| Optidscreens | unused | attrib1 | value1 | ... | ||
| HM_tag | unused | attrib1 | value1 | ... | ||
| Mbjoint | unused | attrib1 | value1 | ... | ||
| Mbplane | unused | attrib1 | value1 | ... | ||
| Dobjrefs | unused | attrib1 | value1 | ... | ||
| Contactsurfs | Card Image/ Template Tag | attrib1 | value1 | ... | ||
| Connectors | unused | attrib1 | value1 | ... | ||
| Shapes | unused | attrib1 | value1 | ... | ||
| Handles | unused | attrib1 | value1 | ... | ||
| Domains | unused | attrib1 | value1 | ... | ||
| Symmetrys | unused | attrib1 | value1 | ... | ||
| Solids | unused | attrib1 | value1 | ... | ||
| Morphconstraints | unused | attrib1 | value1 | ... | ||
| Hypercubes | unused | attrib1 | value1 | ... | ||
| Ddvals | unused | attrib1 | value1 | ... |
Examples
To add all the properties that use the Nastran PBUSH
card:
*createmark props 1
*appendmarksolverdata(props, 1, 1, 857, All)Here the Property entities ("props") that use Nastran (solver "1") attribute ID 857 (from the ARG. Table) set to any value, are added to the mark.
To add all the LS-DYNASingle_surface_contacts
to the
mark:
*createmark props 1
*appendmarksolverdata(groups, 9, 1, 3, 1, 2389, 0, 97, 1, 4733, 0)For example, you can use this command to create a mark containing all the components in the model that use the LS-DYNA *PART_INTERTIA card image.