*contactsurfcreatewithfacesusingfacenumber

Creates a contact surface using 2D element edges or 2D/3D element faces.

Syntax

*contactsurfcreatewithfacesusingfacenumber name color mark_id face_number reverse_normals

HyperMesh Tcl Modify

Creates a contact surface using 2D element edges or 2D/3D element faces.

name: The name of the contact surface to create.
color: The color of the contact surface. Valid values are 1 through 64.
mark_id: The ID of the mark that contains the elements to use. Valid values are 1 and 2.
face_number: The face number of the element (starting from 0).
reverse_normals: 0 - Create contact surface along element normal.; 1 - Create contact surface opposite element normal.

To create a contact surface named "test" with elements 1-100 using face number 3:

*createmark elems 1 1-100
*contactsurfcreatewithfacesusingfacenumber "test" 5 1 3 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

11.0.101