*linear1delements
Creates 1D elements between two sets of plate elements.
Syntax
*linear1delements mark1 mark2 node11 node12 node13 node21 node22 node23 density config
Type
HyperMesh Tcl Modify
Description
Creates 1D elements between two sets of plate elements.
Inputs
- mark1
- The ID of the first group of plate elements.
- mark2
- The ID of the second group of plate elements.
- node11
- The ID of the first alignment node for the first group of elements.
- node12
- The ID of the second alignment node for the first group of elements.
- node13
- The ID of the third alignment node for the first group of elements.
- node21
- The ID of the first alignment node for the second group of elements.
- node22
- The ID of the second alignment node for the second group of elements.
- node23
- The ID of the third alignment node for the second group of elements.
- density
- The number of elements being created between the two sets of plate elements.
- config
- The config number for the 1D element (plot, rod, etc.). The default value is plot.
Errors
None.