*hf_setdieline

Sets the selected lines as TL or POL.

Syntax

*hf_setdieline entity_type line_id flag

HyperMesh Tcl Modify

This command sets the selected lines as TL or POL.

entity_type: Must be set to lines.
mark_id: The mark ID containing the lines of interest. Valid values are 1 and 2.
flag: 0 - Set as TL.; 1 - Set as POL.

To set line 15 as POL:

*createmark lines 1 15
*hf_setdieline lines 1 1

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

11.0