*morphmaptshpedge

Syntax

*morphmaptshpedge dtype dmark etype emark stype smark lline plane line points niproj iproj clear sym con type

Type

HyperMesh Tcl Modify

Description

Adds and edge domain perturbation to the current temporary shape.

Inputs

dtype

Domains

dmark

Domain mark number

etype

Elems

emark

Element mark number

stype

Surfs

smark

Surface mark number

lline

Not currently used

plane

Mark number of plane

line

ID of line

points

Mark number of points for a line

niproj

Direction of projection:

0 - Along vector (iproj)

1 - Normal to geom

2 - Fit to line (if to a line or node list) normal to elems (if to a plane, surface, or mesh).

clear

Determine if/how to delete perturbations:

0 - Add perturbation

1 - Clear temporary and add perturbation

2 - Reject last *morphmaptshpedge() operation

sym

0 - Do not use symmetry (only option)

con

1 - Use constraints (only option)

type

The type of target to be mapped to.

0 - Node list

1 - Line

2 - Plane

3 - Surface

4 - Elements

Example

*morphmaptshpedge (DOMAINS,1,ELEMS,1,SURFS,1,NULL,1,32,1,0,1,0,0,1,1)

This command is part of the map to geometry function which consists of multiple commands. This command is called any number of times, first with clear set to 1, then subsequently set to 0, followed either by one of the many *morphmapto…() commands. If clear is set to 2 then the last *morphmaptshpedge() command is rejected.

Type denotes the type of target to be mapped to. Either the plane, line, points, surface mark, or element mark must be filled with a valid entry corresponding to the type selected.

Errors

if { [ catch {command_name...} ] } {
   # Handle error
}