*latparmupdate
Updates lattice optimization control parameters.
Syntax
*latparmupdate minrad_toggle minrad_value clean_toggle clean_value r2lratio_toggle r2lratio_value latlb_toggle latlb_value strmeth_toggle strmeth_value ossrmsh_toggle ossrmsh_value porosity_toggle porosity_value tetsplt_toggle tetsplt_value
Type
HyperMesh Tcl Modify
Description
Updates lattice optimization control parameters.
Inputs
- minrad_toggle
- Minrad state 1 (on) or 0 (off).
- minrad_value
- Minrad value.
- clean_toggle
- Clean state 1 (on) or 0 (off).
- clean_value
- Clean YES or NO.
- r2lratio _toggle
- R2lratio state 1 (on) or 0 (off).
- r2lratio _value
- R2lratio value.
- latlb _toggle
- Latlb state 1 (on) or 0 (off).
- latlb _value
- Latlb value AUTO, USER or CHECK.
- strmeth_toggle
- Strmeth state 1 (on) or 0 (off).
- strmeth_value
- Strmeth value PNORM or FSD.
- ossrmsh_toggle
- Ossrmsh state 1 (on) or 0 (off).
- ossrmsh_value
- Ossrmsh value.
- porosity_toggle
- Porosity state 1 (on) or 0 (off).
- porosity_value
- Porosity value HIGH, MED or LOW.
- tetsplt_toggle
- Tetsplt state 1 (on) or 0 (off).
- tetsplt _value
- Tetsplt value YES or NO.
Example
To update lattice optimization parameters:
*latparmupdate 1 0.1 1 "NO" 1 0.2 1 "AUTO" 1 "FSD" 1 0.3 1 "MED" 1 "YES"Errors
Incorrect usage results in a Tcl error. To
detect errors, you can use the catch
command:
if { [ catch {command_name...} ] } {
# Handle error
}Version History
14.0