*savefailedsurfstomark
Scans all the displayed surfaces, finds those for which all the meshing algorithms failed, and places them on the specified mark. This command is used after one of the commands performing meshing by surfaces.
Syntax
*savefailedsurfstomark surfs_mark
Type
HyperMesh Tcl Modify
Description
Scans all the displayed surfaces, finds those for which all the meshing algorithms failed, and places them on the specified mark. This command is used after one of the commands performing meshing by surfaces.
Inputs
- surfs_mark
- The mark the surfaces failed to be meshed must be placed to. It must be 1 or 2.
Example
To mesh displayed surfaces and place failed surfaces on mark 2:
*createmark(surfaces,1) "displayed"
*defaultmeshsurf(1,20,2,2,1,0,1,1,1,0,0,0,0)
*createmark(surfaces,2)
*savefailedsurfstomark(2)Note that *createmark(surfaces,2) is placed before *savefailedsurfstomark(2) to clear all the surfaces from the specified mark.
Errors
None.