*mechadjustballjoint

Syntax

*mechadjustballjoint name x y z tolerance lock angle_step

HyperMesh Tcl Modify

Actuates a ball joint to reach a new value. The mechanism must have the enabled flag set to true for this to be possible.

name: The name of the joint to adjust.
x: The desired x Euler angle value of the joint (double).
y: The desired y Euler angle value of the joint (double).
z: The desired z Euler angle value of the joint (double).
tolerance: The tolerance allowed when adjusting (double).
lock: 1 - All joints in the mechanism which are not part of the cycle of the given joint are locked.
angle_step: The size of the iterative steps used to solve for the new value of the joint. Only used for rotation.

To move a joint named TORSO_to_RIGHT_UPPER_LEG to x=20, y=0, z=0 with a tolerance of 0.001, locking other joints and angle step = 0:

*mechadjustballjoint "TORSO_to_RIGHT_UPPER_LEG" 20.0 0.0 0.0 0.001 1 0

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

14.0.120