*midsurface_edit_base_surfaces

Adds or removes surfaces to the base surfaces used in midsurfacing.

Syntax

*midsurface_edit_base_surfaces mark_id mode distance reserved

HyperMesh Tcl Modify

Adds or removes surfaces to the base surfaces used in midsurfacing.

mark_id: The ID of the mark containing the surfaces to add or remove. Valid values are 1 and 2.
mode: The mode for the selected surfaces. Valid values are:; 1 - Add to base surfaces; -1 - Remove from base surfaces
distance: The distance from the base surfaces to the mid-surface.
reserved: Reserved for future use. Must be set to 0.

To add surfaces 10 and 20 with a distance of 1.5 to the base surfaces:

*createmark surfs 1 10 20
*midsurface_edit_base_surfaces 1 1 1.5 0

None.

11.0