*CE_ProjectionCheck

Syntax

*CE_ProjectionCheck ce_inmark ce_outmark length_flag length tolerance sel_type future1 future2 future3

Type

HyperMesh Tcl Modify

Description

Check quality of projections with connectors.

Inputs

ce_inmark: Mark including connectors to be checked.
ce_outmark: Mark including failed connectors.
length_flag: 0 - Use T1+T2/2 as checking length.; 1 - Use length as checking length.
length: The value of checking length, only be used when length_flag =1.
length_tol: The allowable variation in projection length compared to the value for length.
checking_type: 0 - Check too long.; 1 - Check too short.; 2 - Check both too long and too short.
future1: Not presently used.
future2: Not presently used.
future3: Not presently used.

Examples

Connectors marked will be checked if they are too long with respect to length 10.0, with tolerance 0.2, and failed connectors will be placed on mark 2:

*createmark connectors 1 all
*CE_ProjectionCheck 1 2 1 10.0 0.2 0 0 0 0
hm_getmark connectors 2

Errors

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

Version History

9.0