*beamsectioncreatestandardsolver

Creates a standard solver-specific HyperBeam section.

Syntax

*beamsectioncreatestandardsolver type solver type_name orient

Type

HyperMesh Tcl Modify

Description

Creates a standard solver-specific HyperBeam section. For a list of values that are supported by each solver, see the topics in the See Also section.

Inputs

type
Integer indicating the type of section to create. Each solver has a number of available sections.
solver
Integer indicating the solver the section is being created for. Valid values are:
0 – HyperBeam
1 – OptiStruct/Nastran
2 – Abaqus
8 – ANSYS
9 – LS-DYNA
21 – Permas
22 – Madymo
type_name
Name indicating the type of section to create. Each type can have multiple available section names.
orient
Flag indicating the orientation of the section:
0 – 0 degrees
1 – 90 degrees
2 – 180 degrees
3 – 270 degrees

Examples

To create a standard HyperBeam T-section having a 0 degree orientation:
*beamsectioncreatestandardsolver 1 12 I 0
To create a standard OptiStruct T-section having a 0 degree orientation:
*beamsectioncreatestandardsolver 15 0 HMTSec 0

Errors

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:
if { [ catch {command_name...} ] } {
   # Handle error
}

Version History

9.0